3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: 23/64 shafts?  (Read 344 times)

Offline Blaino

  • Trad Bowhunter
  • **
  • Posts: 1265
23/64 shafts?
« on: December 08, 2011, 08:11:00 AM »
i got a dozen of my first wood shafts on the way.... will 11/32 bh fit on a 23/64 shaft?
Logged
"It's not the trophy, but the race. It's not the quarry,
but the chase."

Offline buckracks7

  • Trad Bowhunter
  • **
  • Posts: 654
Re: 23/64 shafts?
« Reply #1 on: December 08, 2011, 08:20:00 AM »
Yes
Logged
If it's in your way, move it.

Offline Blaino

  • Trad Bowhunter
  • **
  • Posts: 1265
Re: 23/64 shafts?
« Reply #2 on: December 08, 2011, 08:54:00 AM »
i know that the head will go on the shaft.  I should have asked if it would have a smooth transition from head to shaft?

like head to shaft. not head, little bit of taper then shaft?...
Logged
"It's not the trophy, but the race. It's not the quarry,
but the chase."

Offline BowHunterGA

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 1106
Re: 23/64 shafts?
« Reply #3 on: December 08, 2011, 09:19:00 AM »
There is a small transition from broadhead to the non-tapered part of the shaft but honestly is barely noticible and I have not noticed any issues. The picture below is a 165 grain STOS on a 23/64 POC shaft from Twig Archery.

 

Good luck!
Logged

Offline Blaino

  • Trad Bowhunter
  • **
  • Posts: 1265
Re: 23/64 shafts?
« Reply #4 on: December 08, 2011, 09:24:00 AM »
thats what i was wanting to know. thanks.
Logged
"It's not the trophy, but the race. It's not the quarry,
but the chase."

Offline rraming

  • Trad Bowhunter
  • **
  • Posts: 1576
Re: 23/64 shafts?
« Reply #5 on: December 08, 2011, 10:38:00 AM »
some are made to fit both - the Magnus two blade is an example. There is no taper showing
Logged

Offline DuffyRP

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 119
Re: 23/64 shafts?
« Reply #6 on: December 08, 2011, 10:57:00 AM »
Woodmans fit great on 23/64
Logged
United Bowhunters of Illinois
Traditional Archery Society
Compton Traditional Bowhunters
TGMM Family of the Bow

Online dixiearcher

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 384
Re: 23/64 shafts?
« Reply #7 on: December 08, 2011, 01:29:00 PM »
I use the 11/16 STOS and 23/64 shafts and love them! If you really seat the broadheads good you will hardly be able to tell the difference!  When target shooting, the small transition also aids in arrow removal.
Logged
Preach the gospel, die, and be forgotten
-Count von Zinzendorf

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: 23/64 shafts?
« Reply #8 on: December 08, 2011, 04:55:00 PM »
You can do a little hand sanding to smooth the transition especially with FP's-BH's usually are a little more tolerant.
Logged
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©