Author Topic: Grizzly broadhead shooters I need your help (Read 2919 times)

L82HUNT · « **Reply #100 on:** January 09, 2012, 06:31:00 PM »

Tip I use

stalkin4elk · « **Reply #101 on:** January 09, 2012, 07:06:00 PM »

How about selling a good quality broadhead storage box for a dozen and maybe a smaller field version for six. Make them foam filled,rattle free, with quality closures, and tall enough to hold the 3 inchers plus inserts vertically.Put a cool logo like your website on it.

Steve H. · « **Reply #102 on:** January 09, 2012, 10:01:00 PM »

Bill, I sent a few pics on to TJ, hopefully he received them.

Steve H. · « **Reply #103 on:** January 09, 2012, 10:07:00 PM »

(A crappy 2 blade blood trail)

L82HUNT · « **Reply #104 on:** January 10, 2012, 07:51:00 AM »

That is a really cool pic with the claw

KentuckyTJ · « **Reply #105 on:** January 10, 2012, 08:19:00 AM »

Got them Steve thanks brother. Those are fantastic.

Mike Gerardi · « **Reply #106 on:** January 10, 2012, 08:20:00 AM »

Yes very cool pic.

flyfish1 · « **Reply #107 on:** January 11, 2012, 07:43:00 AM »

Bill,
I like the color coding the previous manufactuer used. Is that your plan or will all weights be the same finish?

zipper bowss · « **Reply #108 on:** January 11, 2012, 08:02:00 AM »

Great pictures Steve!!

Mike your hog pictures shows the S pretty well.Thanks!

The broadheads are color coded still.

DVSHUNTER · « **Reply #109 on:** January 12, 2012, 09:18:00 AM »

Put a grizzley 190 through a deer last night and almost cut the leg off on the other side. I was hunting with l82hunt and shooting a yew selfbow. Razor sharp broadhead+shor placement equals dead.

Ringneck · « **Reply #110 on:** January 12, 2012, 09:26:00 PM »

Bill,

Here's a Grizz 160 kill.

Terry Green · « **Reply #111 on:** January 12, 2012, 09:43:00 PM »

Just revisiting this thread....I hear ya....just keep that suggestion in the back of your mind AND on the drawing board.

Also, I'll try and call you tomorrow.....got another suggestion for you to increase sales of existing heads if possible.

Pat B. · « **Reply #112 on:** January 13, 2012, 07:52:00 AM »

1 1/4" wide option sure would be a seller, I believe.

zipper bowss · « **Reply #113 on:** January 13, 2012, 08:15:00 AM »

The regular grizzly is 1 1/8" wide.
The big Grizzly "Kodiak" (formerly called El Grande) is 1 1/4" wide.
The width increased when Shawn changed the dies so that the steel went all the way across the back edge.

Thanks for the pictures!

Dirtybird · « **Reply #114 on:** January 13, 2012, 02:11:00 PM »

Very glad to see this.

Molson · « **Reply #115 on:** January 13, 2012, 02:43:00 PM »

Great pics!

beyondmyken · « **Reply #116 on:** January 13, 2012, 03:31:00 PM »

1 1/4 in wide you say? Maybe the big griz should be called the "muy grande"

Fletcher · « **Reply #117 on:** January 13, 2012, 10:56:00 PM »

My El Grandes all measure right at 1 1/8" when new. Maybe they lose a bit in the grind process. If you can keep them at 1 1/4", that would be great. I will say that even at 1 1/8", the hole they cut is much wider. :eek:

Bill, I'll be looking for some more 200's at K'zoo.

tawmio · « **Reply #118 on:** January 17, 2012, 11:12:00 PM »

Im all for 1 1/4 as well some places one cant legally hunt with broadheads under 1 1/8 so after sharpening them lightly one would quickly end up with a bit less.

Just to add to the sharpening conversation. Ironically i use a wet grinder from grizzly.com

http://www.grizzly.com/products/8-Grinder-Sharpener/T10097

one can come by this grinder for $80 and it will do knives as well.

JimB · « **Reply #119 on:** January 18, 2012, 09:47:00 AM »

My newer,200 gr Grizzlies are exactly 1 3/16" wide,not 1 1/4".I could resharpen these for years without losing 1/16" of width.

Not a bad rule but at least in the States,I doubt many States have a 1 1/8" requirement.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Grizzly broadhead shooters I need your help (Read 2919 times)

Users currently browsing this topic: