Author Topic: Glue or Tape (Read 608 times)

bolo7735 · « **on:** January 20, 2012, 04:08:00 PM »

I'm planning to fletch my own arrows. What do you guys flavor glue or tape and brand do you use?

Smithhammer · « **Reply #1 on:** January 20, 2012, 04:09:00 PM »

Tape, with a drop of GT arrow glue at either end of the fletch.

Randy Koleno · « **Reply #2 on:** January 20, 2012, 04:14:00 PM »

Same as Smithhammer, I believe Bohning makes the tape I use.

cbCrow · « **Reply #3 on:** January 20, 2012, 04:14:00 PM »

I've been using Duco glue for a long time and it has always worked well for me. I have used it on wood and aluminum with positive results, ain't gonna change now.

Fletcher · « **Reply #4 on:** January 20, 2012, 04:31:00 PM »

Glue for me; Duco on most wood arrow finishes and Fletchtite Platinum if I was going to do alum or carbon. I used tape a couple of times. It was quick, but no easier and I didn't like the long term results. Not to mention a tube of Duco is cheap and does lots of arrows.

Bjorn · « **Reply #5 on:** January 20, 2012, 04:37:00 PM »

I use glue; but tape is good.

stagetek · « **Reply #6 on:** January 20, 2012, 04:42:00 PM »

Fletch-tite platinum has worked well. Never needed to try tape.

drewsbow · « **Reply #7 on:** January 20, 2012, 04:47:00 PM »

I love tape

JRY309 · « **Reply #8 on:** January 20, 2012, 05:14:00 PM »

I prefer to glue,just always have!

joebewan · « **Reply #9 on:** January 20, 2012, 05:18:00 PM »

started using the tape about a year ago and lovin it. like Smithhammer little drop on each end havnt had one come loose yet.----------joey

Jake Diebolt · « **Reply #10 on:** January 20, 2012, 05:25:00 PM »

I havent lost a feather in a year with tape. I used to lose them all the time. Now they wear out faster than they fall off.

katman · « **Reply #11 on:** January 20, 2012, 06:11:00 PM »

Tape for me, only ones that came off were ones I over treated with black magic tire wet.

gringol · « **Reply #12 on:** January 20, 2012, 06:15:00 PM »

tape. For me it's just as durable as glue, easier to use, and less messy.

wooddamon1 · « **Reply #13 on:** January 20, 2012, 06:15:00 PM »

Tape is great. Bohning is the brand I use.

lpcjon2 · « **Reply #14 on:** January 20, 2012, 06:17:00 PM »

Fletch tite or duco on my woods and my sons carbon get beyond bond.

wtpops · « **Reply #15 on:** January 20, 2012, 06:55:00 PM »

TAPE!!!

Rick Richard · « **Reply #16 on:** January 20, 2012, 07:48:00 PM »

X2 on tape

Rick Richard · « **Reply #17 on:** January 20, 2012, 08:12:00 PM »

X2 on tape

Bernie B. · « **Reply #18 on:** January 20, 2012, 08:13:00 PM »

Like Fletcher I use Duco cement for wood arrows and Fletchtite Platinum for aluminum. They've always worked well for me, so I haven't looked for alternatives. It seems that the guys who use tape like that system though.

Bernie Bjorklund

NC Iowa/SW Wisconsin

Rob DiStefano · « **Reply #19 on:** January 20, 2012, 08:28:00 PM »

bohning fletch tape! - for all shaft materials from woodies to carbon. i'll never go back to any form of direct glue again, and that's what i started with 56 years ago ...

here's the fletch end of a carbon arrow that was feather 4-fletched with tape. it had been lost in the south carolina woods for three years, after killing a hog. notice how the feather quills are still firmly affixed to the shaft ...

click the pic below for a tape fletching video ...


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Glue or Tape (Read 608 times)

Users currently browsing this topic: