Author Topic: Antler limb bolts::::::: (Read 682 times)

graybarkhunter · « **on:** March 02, 2012, 11:22:00 PM »

i've been looking around on the "build alongs" and "how to " sections and havent found anything about making antler limb bolts (i may be blind though). does anybody know where i could find some info on this?? i may try it if its not too difficult. if it looks to difficult, then i'll just buy some from somewhere. who sells them? i got a robertson fatal styk Z with a limb bolt thunderhorn quiver. thanks in advance seth

Tyler C. Moore · « **Reply #1 on:** March 02, 2012, 11:37:00 PM »

Bill Dunn at Zipper would be able to make you a pair if you decide to buy. I love the ones on my zipper extreme.

graybarkhunter · « **Reply #2 on:** March 02, 2012, 11:49:00 PM »

i did a search and found that sticshooter is one guy to get in touch with.Zip, bill dunn would also be great to talk to . i really want to make my own as i like DIY projects, so if i could get a "how -to" it'd be nice!i got plenty of burrs and i got two of the longer bolts that i use on my limb bolt quiver,, thanks

Bjorn · « **Reply #3 on:** March 02, 2012, 11:55:00 PM »

Here is a link to a TG thread from last year you may find helpful

http://tradgang.com/cgi-bin/ultimatebb.cgi?ubb=print_topic;f=1;t=099558

DWT · « **Reply #4 on:** March 02, 2012, 11:59:00 PM »

There was a article in Traditional bowhunter about a year ago on doing them yourself.

jcarter · « **Reply #5 on:** March 03, 2012, 07:30:00 AM »

http://www.newoutdoorcore.com/forum/viewtopic.php?t=6434

here's a link that shows you how to make your own replica's, if you want the real thing...skip the first part and just follow the steps for attaching the bolts to the burr. MODS..i know this is a link from another site.. if not allowed, i understand

hope this helps...jc

michbowhunter · « **Reply #6 on:** March 03, 2012, 08:24:00 AM »

I am going to do a couple of sets this weekend. I'll try and take some photos as i do them.

LoweBow · « **Reply #7 on:** March 03, 2012, 10:28:00 AM »

I picked up a set from sticshooter last week. Man does he do pretty work. Perfect size for my RER.

I'd love to try to make a set...

frankwright · « **Reply #8 on:** March 03, 2012, 03:36:00 PM »

Those are really pretty.

I like the looks of them and thought about a set for my Zipper but it seems my bow is always hung on a briar or vine as it is, and those look like they might add to the problem.

michbowhunter · « **Reply #9 on:** March 03, 2012, 05:14:00 PM »

Just did these...hope it helps...

Cover the base with masking tape...this will keep epoxy from sticking later.

These pieces are used to mount the bolts and also hold them square to the burr while the epoxy is setting up. I use 1 1/4" Stainless steel bolts and washers.

I scuff up the washer with 36 grit and gring some grooves into the top of the bolt...this helps give the epoxy something to grab.

7/8" Fostener bit...just a bit larger than the washer...

michbowhunter · « **Reply #10 on:** March 03, 2012, 05:20:00 PM »

Use the dremel to put some small holes inside the burr...also to help the epoxy grab.

What it looks like before adding epoxy...

This 5min stuff works very well...smooth-on works great also...

Here they are clamped together. Notice how the wood block keeps the bolt square to the burr...

I'll post some more after the epoxy sets up...

LoweBow · « **Reply #11 on:** March 03, 2012, 07:19:00 PM »

Thank you MB....I'll be making my next set! AWESOME pictorial!!!!

Guru · « **Reply #12 on:** March 03, 2012, 07:38:00 PM »

I'll be making some soon as well!!! Thanx for the simple desciption and great pix

michbowhunter · « **Reply #13 on:** March 03, 2012, 07:45:00 PM »

Ok, this is where the tape comes in handy. Take off the top nut and remove the wood block. This may take a couple pair of pliers as the spilled over epoxy should be stuck pretty well to the tape.

After the block is free, peal the tape from the bottom up...

Should look something like this...

If there is any leftover tape or epoxy, just sand it off. After sealing, i use a black nylon washer just like the ones used with the bezels...works great!

I like this method because the head of the bolt and washer are actualy holding the limb to the bow...not the burr. If the burr were to break off for whatever reason, the limb would still be attached and shootable.

This is just how I do them...could be better ways, but I hope it helps...Jared

frankwright · « **Reply #14 on:** March 03, 2012, 07:45:00 PM »

Very Nice, Michbowhunter. Looking forward to seeing more.

Dang, now I have to kill a deer with bases that big. No more WWFD!

Bldtrailer · « **Reply #15 on:** March 03, 2012, 07:46:00 PM »

THAT

SHOULD BE

build along!

tradbower · « **Reply #16 on:** March 03, 2012, 07:54:00 PM »

Thanks for the great buildalong. I will be making a set.

The Whittler · « **Reply #17 on:** March 03, 2012, 09:00:00 PM »

In one of the back issue of TBM. Don't emember what number/year TBM. It was very good instruction and easy to do. I do remember JB weld was used instead of epoxy.

flippnsticks · « **Reply #18 on:** March 03, 2012, 09:05:00 PM »

my hats off

grayfeather · « **Reply #19 on:** March 03, 2012, 09:21:00 PM »

Very nice, thank;s for the pictures, really helps.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Antler limb bolts::::::: (Read 682 times)

Users currently browsing this topic: