3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: What to do with some deer midsections ?  (Read 204 times)

Offline Flinttim

  • Trad Bowhunter
  • **
  • Posts: 496
What to do with some deer midsections ?
« on: April 21, 2012, 10:39:00 PM »
The fine fellers at the ITBA gave my grandson 4 deer midsection that they were replacing. Still plenty of shooting left in them for a 10 year old. Trying to get some ideas on how to join the 2 pairs to create two "headless" deer for him. The joints are the same so they can't be slipped together. I'm sure some of you have done it and can lend some insight. Cut the dovetails off both pieces and glue together some how or maybe try to cut a dovetail groove on one and then slip together and glue ? Need some help here, the boy is getting antsy about shooting them.
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Converml

  • Trad Bowhunter
  • **
  • Posts: 625
Re: What to do with some deer midsections ?
« Reply #1 on: April 21, 2012, 10:54:00 PM »
Cut the dovetail off one then cut a dovetail ( female) cut into it with a wood saw. Use the cut off dovetail as a pattern if you want. If it needs tightening up  use some great stuff spray insulation. And have at it.    :archer2:    :archer2:
Howard Hill Cheetah

Offline Converml

  • Trad Bowhunter
  • **
  • Posts: 625
Re: What to do with some deer midsections ?
« Reply #2 on: April 21, 2012, 10:58:00 PM »
If that doesn't do just cut off the dovetails on both put a hole in both ends for an end of a broom handle or stick about 6" and great stuff them together.
Howard Hill Cheetah

Offline Flinttim

  • Trad Bowhunter
  • **
  • Posts: 496
Re: What to do with some deer midsections ?
« Reply #3 on: April 22, 2012, 08:07:00 AM »
I would think that maybe some of the polyurathane glues would glue them better than foam insulation.
Genesis 27:3 Now therefore take, I pray thee, thy weapons, thy quiver and thy bow, and go out to the field, and take me some venison;

Offline Converml

  • Trad Bowhunter
  • **
  • Posts: 625
Re: What to do with some deer midsections ?
« Reply #4 on: April 22, 2012, 08:43:00 AM »
Maybe, but the target will soak a lot of it up so I've also used a tube of wall board glue (with a calking gun)for gluing  paneling to Sheetrock.
Howard Hill Cheetah

Offline Stump73

  • Trad Bowhunter
  • **
  • Posts: 2852
Re: What to do with some deer midsections ?
« Reply #5 on: April 22, 2012, 08:55:00 AM »
liquid nails and the broom handle.
BigJim Thunderchild 54" 52# @ 28"
BigJim Thunderchild 56" 42# @ 28"

Offline lpcjon2

  • Trad Bowhunter
  • **
  • Posts: 7667
Re: What to do with some deer midsections ?
« Reply #6 on: April 22, 2012, 08:55:00 AM »
Cut off the D tails,cut an arrow into 6" pieces(4) drill a hole a little bigger than the arrow diameter on the four corners of both block and use liquid nails on the arrow pieces(acts like pins) to join the blocks together.
Some people live an entire lifetime and wonder if they have ever made a
difference in the world, but the Marines don’t have that problem.
—President Ronald Reagan

Offline Converml

  • Trad Bowhunter
  • **
  • Posts: 625
Re: What to do with some deer midsections ?
« Reply #7 on: April 22, 2012, 09:05:00 AM »
Liquid nails , that's the name of the stuff. Was sitting there trying to think of the name but could only describe paneling Sheetrock. Thanks guys
Howard Hill Cheetah

Offline macbow

  • Trad Bowhunter
  • **
  • Posts: 2870
Re: What to do with some deer midsections ?
« Reply #8 on: April 22, 2012, 10:25:00 AM »
If you have the wooded space just set a couple up so there is a tree and brush hiding all but the mid section to make a realistic hunting shot.

I've repaired some targets with the liquid nails and broken arrow shafts.
United Bowhunters of Mo
Comptons
PBS
NRA
VET
"A man shares his Buffalo". Ed Pitchkites

Offline Rob W.

  • Trad Bowhunter
  • **
  • Posts: 2571
Re: What to do with some deer midsections ?
« Reply #9 on: April 22, 2012, 10:33:00 AM »
I would butt them up with the dove tails touching. Plastic wrap them and fill the void with foam.
This stuff ain't no rocket surgery science!

Offline Bjorn

  • Trad Bowhunter
  • **
  • Posts: 8789
Re: What to do with some deer midsections ?
« Reply #10 on: April 22, 2012, 10:44:00 AM »
I like hanging the left over torsos from tree limbs.

Offline Bowwild

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 5433
Re: What to do with some deer midsections ?
« Reply #11 on: April 22, 2012, 01:45:00 PM »
Whew, I thought this was going to be a Pepto Bismo thread!

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©