Author Topic: Sharpening the 3 blade VPA Broadheads (Read 819 times)

Rob W. · « **Reply #20 on:** April 23, 2012, 03:54:00 PM »

Good stuff! Same process here but I finish with a wheelie instead of the jewel stick.

Shedrock · « **Reply #21 on:** April 23, 2012, 07:33:00 PM »

Good stuff Andy.

razorsharptokill · « **Reply #22 on:** April 23, 2012, 07:44:00 PM »

I love these heads, very high quality.

Coonbait · « **Reply #23 on:** April 23, 2012, 08:33:00 PM »

Nice Job!
Glenn

DesertDude · « **Reply #24 on:** April 23, 2012, 09:04:00 PM »

Thank You Andy......

Friend · « **Reply #25 on:** April 23, 2012, 09:08:00 PM »

Much thanks Andy!!!!!!!!!!!

Jwilliam · « **Reply #26 on:** April 23, 2012, 10:14:00 PM »

Great stuff Andy !!!

Bill

Bivyhunter · « **Reply #27 on:** April 23, 2012, 11:42:00 PM »

Thanks Andy, now my VPA tipped Kinetics will blow through animals even faster!

Whip · « **Reply #28 on:** April 23, 2012, 11:52:00 PM »

Good stuff Andy. I do pretty much the same thing with Woodsmans, and it works great on them too. I had seen your reports on the VPA's and plan to switch to them for the fall hunts.

Ryan Sanpei · « **Reply #29 on:** April 24, 2012, 02:50:00 AM »

Thanks for the great vid Andy!

Hopewell Tom · « **Reply #30 on:** April 24, 2012, 05:35:00 AM »

Doesn't look like it could get much simpler than that. Thanks for this. I've seen the posts of the hole these heads make and am going to be ordering some soon. I'll get a 12" file while I'm at it.

FerretWYO · « **Reply #31 on:** April 24, 2012, 10:57:00 AM »

Thats is a great video That is almost exactly how I have learned works best for me as well.

Gen273 · « **Reply #32 on:** April 24, 2012, 02:05:00 PM »

Thanks for the info!!

razorsharptokill · « **Reply #33 on:** April 24, 2012, 04:40:00 PM »

I have three 175s that are going to Wyoming with me this fall for Elk. I now have no doubt that they are a wise choice. Medium diamond stone them japanese water stones-600/1200 grit, then stropped on leather.

The other 3 in my quiver will be Zwickey deltas.

Bernie B. · « **Reply #34 on:** April 24, 2012, 06:09:00 PM »

Very nice video! I haven't used three bladed heads for over forty years, but I think I'm going to give them a try this fall. I've often wondered about the sharpening method for them. Thanks for sharing!

Bernie Bjorklund

NC Iowa/SW Wisconsin

LimBender · « **Reply #35 on:** April 24, 2012, 06:09:00 PM »

That's pretty much what I found works, but it took a while to get that first sharpening to take.

Nice patch there.

razorsharptokill · « **Reply #36 on:** April 24, 2012, 07:32:00 PM »

Mine were the sharpest three blade head out of the package I have ever seen. Didn't take much time at all to make them deadly sharp.

LimBender · « **Reply #37 on:** April 24, 2012, 10:12:00 PM »

The ones I had were not the KME pre-sharpened. Had to get a good grind going. The new ones look like they will be a lot easier to get there.

tradtusker · « **Reply #38 on:** April 24, 2012, 10:42:00 PM »

These are Vantage Point Archery Heads Limbender... I think you have them confused with the Grizzly's or something else.

These come with a very accurate grind strait out of the packet, plus they are so tough you end up using them again and again.

LimBender · « **Reply #39 on:** April 25, 2012, 10:02:00 AM »

Nope - I hunt with VPA's and watched your video, but I was wrong that the new ones are KME sharpened - it is the Wensel Woodsman Elites (basically same head) from 3 Rivers that are KME sharpened. Sorry for confusion.

I am a little sharpening challenged, so it took me a while the first go round to get them really sharp, but they are pretty sharp out the box.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Sharpening the 3 blade VPA Broadheads (Read 819 times)

Users currently browsing this topic: