3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: help with a grayling jig,  (Read 453 times)

Offline Brianlocal3

  • Trad Bowhunter
  • **
  • Posts: 4846
help with a grayling jig,
« on: May 19, 2012, 08:46:00 PM »
I bought a grayling jig today to try and learn how to fletch some arrows.  It has 3 little lines and 3 big lines for cock feather placement, and I figured that out. But as far as offset goes, there are a bunch of lines by the nock end of the magnet, and a bunch of little lines by the point end of the magnet. I can not seem to get them to offset much without getting my feather off of the shaft? I dont know what im doing wrong. I have the shafts i picked up fromt he shot right next to me for a reference, and no matter what, it seems like one edge of the feather does not want to make contact with the shaft.

does anyone have a video or a pictorial stashed away you can post for me.  Thank you for any and all help offered.
Logged
JD Berry Taipan (original) 53@28 62”
Cascade mountain Brush Hawk 53@28 56”

Offline Brianlocal3

  • Trad Bowhunter
  • **
  • Posts: 4846
Re: help with a grayling jig,
« Reply #1 on: May 19, 2012, 08:58:00 PM »
Is there a how to section here? I can not find it. I dont want to bother anyone if its already written out.
Logged
JD Berry Taipan (original) 53@28 62”
Cascade mountain Brush Hawk 53@28 56”

Offline Brianlocal3

  • Trad Bowhunter
  • **
  • Posts: 4846
Re: help with a grayling jig,
« Reply #2 on: May 19, 2012, 09:16:00 PM »
Ok, I cried wolf i think, Ill post pics of my very sloppy first take at fletching. I think i figured it out.
I was practicing while my two kids were running around arguing and i was getting flusterd.
Logged
JD Berry Taipan (original) 53@28 62”
Cascade mountain Brush Hawk 53@28 56”

Offline wooddamon1

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 4481
Re: help with a grayling jig,
« Reply #3 on: May 20, 2012, 09:22:00 AM »
Did you try a dry run adjusting the two nobs until the feather contacts the shaft the whole length?

Are you using a straight clamp, or is it left or right helical?
Logged
"The history of the bow and arrow is the history of mankind..."-Fred Bear

Offline PeteA

  • Trad Bowhunter
  • **
  • Posts: 968
Re: help with a grayling jig,
« Reply #4 on: May 20, 2012, 08:32:00 PM »
Having same issue. I'm watching this one.
Logged
Predator Hunter 46#@28
'70 Bear Kodiak Hunter 45#@28
'72 Bear Grizzly 45#@28

Offline Warren Cowen

  • Trad Bowhunter
  • **
  • Posts: 158
Re: help with a grayling jig,
« Reply #5 on: May 20, 2012, 08:39:00 PM »
Me to... I will be looking at this post.
Logged
Warren Cowen

Offline Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12251
  • Contributing Member
    • Cavalier Pickups
Re: help with a grayling jig,
« Reply #6 on: May 20, 2012, 08:56:00 PM »
it's all here ---  CLICK ME
Logged
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12251
  • Contributing Member
    • Cavalier Pickups
Re: help with a grayling jig,
« Reply #7 on: May 20, 2012, 08:57:00 PM »
Logged
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline Tall Paul

  • Trad Bowhunter
  • **
  • Posts: 545
Re: help with a grayling jig,
« Reply #8 on: May 20, 2012, 08:58:00 PM »
There was a video on here that Rob did, that was very helpful.
Logged
Is a life of rice cakes really life, or just passing time?-Rick Bragg

Offline Rob DiStefano

  • Administrator
  • Trad Bowhunter
  • ****
  • Posts: 12251
  • Contributing Member
    • Cavalier Pickups
Re: help with a grayling jig,
« Reply #9 on: May 20, 2012, 09:00:00 PM »
click the image for a fletch tape vid using a grayling ...

 
Quote
Originally posted by Rob DiStefano:
       
Logged
IAM ~ The only government I trust is my .45-70 ... and my 1911.

Offline Tall Paul

  • Trad Bowhunter
  • **
  • Posts: 545
Re: help with a grayling jig,
« Reply #10 on: May 20, 2012, 09:00:00 PM »
Thats it!

If you just bought your first jig, Rob's video will save you lots of time!
Logged
Is a life of rice cakes really life, or just passing time?-Rick Bragg

Offline Brianlocal3

  • Trad Bowhunter
  • **
  • Posts: 4846
Re: help with a grayling jig,
« Reply #11 on: May 20, 2012, 09:54:00 PM »
Thank you all very much.  I have not had time to post my looks yet due to church them birthday party then church again, then I had to run duct at the house.
I thought Sunday was a day of rest. LOLW
Logged
JD Berry Taipan (original) 53@28 62”
Cascade mountain Brush Hawk 53@28 56”

Offline Brianlocal3

  • Trad Bowhunter
  • **
  • Posts: 4846
Re: help with a grayling jig,
« Reply #12 on: May 20, 2012, 09:56:00 PM »
Post my pics is what it should have said
Logged
JD Berry Taipan (original) 53@28 62”
Cascade mountain Brush Hawk 53@28 56”

Offline monsterbuck

  • Trad Bowhunter
  • **
  • Posts: 702
Re: help with a grayling jig,
« Reply #13 on: May 21, 2012, 02:49:00 PM »
Great video Rob,  thanks for sharing.  God bless.
Logged
John 3:16  Whosoever Will

Offline PeteA

  • Trad Bowhunter
  • **
  • Posts: 968
Re: help with a grayling jig,
« Reply #14 on: May 27, 2012, 06:36:00 AM »
Ttt
Logged
Predator Hunter 46#@28
'70 Bear Kodiak Hunter 45#@28
'72 Bear Grizzly 45#@28
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©