Author Topic: Wood arrow supplier (Read 854 times)

hardtimes · « **on:** June 14, 2012, 09:38:00 AM »

I have really became interested in picking up a set of wood arrows form my Widow longbow. I am turning to you guys for help since I have shot alumnium shafts my entire life.

The bow is a Widow Longbow 58 @ 28, I draw to 30.5" I like to have the arrows around 32" or so. After looking around it seems most ready-made woodies are too short. Can anyone suggest a sponsor to talk to or a spine range for this bow?

Thanks
Ray

jonsimoneau · « **Reply #1 on:** June 14, 2012, 10:09:00 AM »

Hilldebrant. Not sure if they are a sponsor but a lot of the shaft suppliers buy Sitka spruce shafts from them. Pretty sure they can get you some that are 32 inches. I'm positive they can get you some that are 31 inches. I just got a batch of tapered Sitka spruce that are flying perfectly out of my habu vyperkhan which is around 54 pounds at my 28.5 inch draw length. They are spined 70/74 and cut to 29 inches with a 125 grain point. You will need a heavier spine for your bow especially if you want to keep them that long. I like Sitka spruce the best for their toughness lighter weight and speed/flat trajectory.

Shortlongbow · « **Reply #2 on:** June 14, 2012, 10:15:00 AM »

I'd talk to snag at wilderness custom arrows. He's a sponser here. 32" might be a stretch.

snag · « **Reply #3 on:** June 14, 2012, 10:29:00 AM »

Hi Ray,
We could fix you up with some that would be 31.5" bop??? Shafts are normally cut to 32".

Mike Vines · « **Reply #4 on:** June 14, 2012, 11:12:00 AM »

Get them footed if you need longer.

hardtimes · « **Reply #5 on:** June 14, 2012, 01:31:00 PM »

Snag, I am definitely interested. Let me measure my alumnium shafts tonight. I am pretty sure the set I have is 32". A set cut to 31.5" would most likely work but I would not be able to adjust length for tuning proposes.

Mike as far as footed shafts, can I buy footed shafts anywhere, or is this a DIY?

Mike Vines · « **Reply #6 on:** June 14, 2012, 01:34:00 PM »

Quote

Originally posted by hardtimes:

Mike as far as footed shafts, can I buy footed shafts anywhere, or is this a DIY?

Yes

LBR · « **Reply #7 on:** June 14, 2012, 01:41:00 PM »

There's a product called "Reparrow" that you can use to easily and relatively cheaply add 3" to your arrow shaft. They are wood, and a lot cheaper than conventional footings.

e-mail is [email protected]

Chad

babs · « **Reply #8 on:** June 14, 2012, 02:00:00 PM »

I just got some arrows from snag and they are awesome and its my first set of woodies and I'm stoked. they look awesome and the work is A++

AngelDeVille · « **Reply #9 on:** June 14, 2012, 05:44:00 PM »

My arrows arrived from Wilderness Custom last week, and I'm in hog heaven!

32" shouldn't be a problem, they make trees taller than that....

Terry Lightle · « **Reply #10 on:** June 14, 2012, 06:53:00 PM »

I will second snag at Wilderness arrows

hardtimes · « **Reply #11 on:** June 14, 2012, 09:07:00 PM »

Snag, I sent you a PM asking a couple of questions.

Chad, Thanks for the email. The Reparrow might be an option for me. They look pretty simple and easy to use.

Thanks for the information guys.

gringol · « **Reply #12 on:** June 14, 2012, 09:11:00 PM »

Quote

Originally posted by hardtimes:
Snag, I am definitely interested. Let me measure my alumnium shafts tonight. I am pretty sure the set I have is 32". A set cut to 31.5" would most likely work but I would not be able to adjust length for tuning proposes.

Mike as far as footed shafts, can I buy footed shafts anywhere, or is this a DIY?

I think you'll find wood more forgiving than aluminum. You can get a bareshaft test kit at 31.5" with the point weight you like. Shoot the kit, find the spine that works best and roll with it. No need to adjust length. The 5# spine increments of woodies make them a snap to tune if you get a test kit.

arrowking · « **Reply #13 on:** June 14, 2012, 09:34:00 PM »

Try our western larch. tuesday the 19th we will have more made. They are stronger than douglas fir.

hardtimes · « **Reply #14 on:** June 14, 2012, 09:38:00 PM »

Whats the length on the western larch shafts?

hardtimes · « **Reply #15 on:** June 14, 2012, 09:41:00 PM »

Where can I pick up a test kit? I thought 3 Rivers had them but cant seem to find them now.

gringol · « **Reply #16 on:** June 15, 2012, 10:54:00 AM »

Quote

Originally posted by hardtimes:
Where can I pick up a test kit? I thought 3 Rivers had them but cant seem to find them now.

Surewood sells them. I believe Wilderness Custom Arrows also sells them. With wood, you should get a test kit in the same type of wood you're planning on shooting. Some woods have similar dynamic spine while others are very different (i.e. spruce vs. ash).

backyardbowhunter · « **Reply #17 on:** June 15, 2012, 11:39:00 AM »

Talk to Mike at the nocking point. He can fix you up. I just got a dozen woodies from him and they're beutiful.

Shedrock · « **Reply #18 on:** June 15, 2012, 06:53:00 PM »

Snag builds A+ quality arrows.

hitman · « **Reply #19 on:** June 17, 2012, 11:07:00 AM »

Here is arrows I got from Snag at Wilderness Arrows and the results. Thanks Dave. Don


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Wood arrow supplier (Read 854 times)

Users currently browsing this topic: