Author Topic: VPA Offset 2 Blade Single Bevel 325gr (Read 776 times)

flyne · « **on:** June 18, 2012, 06:01:00 AM »

Has any one tried the VPA Offset 2 Blade Single Bevel Heads
Thanks in advance Jim

Boomerang · « **Reply #1 on:** June 18, 2012, 10:42:00 AM »

They probably haven't seen too much action yet since they were released only about 3 months ago.

Gufunk · « **Reply #2 on:** June 18, 2012, 10:43:00 AM »

any pics of one?

owlbait · « **Reply #3 on:** June 18, 2012, 01:55:00 PM »

Do you mean offset like the Badger broadhead or just single bevel? I didn't see it on their web page.

flyne · « **Reply #4 on:** June 18, 2012, 05:11:00 PM »

They are offset like the badger hears a link hopefully it works
http://www.rayzor-vpa.com/VPA-Offset-2-Blade-Single-Bevel-325gr-VPA-OSSB2BL.htm
Jim

Boomerang · « **Reply #5 on:** June 18, 2012, 05:32:00 PM »

You can't see the offset blades with that picture, but the blades go from past center on the tip to past center on the other side on the back side.

owlbait · « **Reply #6 on:** June 18, 2012, 05:42:00 PM »

I think I will stick to the rotational advantage of the single bevel and leave the offset to others.

2treks · « **Reply #7 on:** June 18, 2012, 05:42:00 PM »

Where can we find out some details?
I would like to check out the concept behind this.
Not much info on that Rayzor site,
CTT

flyne · « **Reply #8 on:** June 18, 2012, 06:05:00 PM »

Hears a link to razors site http://www.rayzor-vpa.com/VPA-Offset-2-Blade-Single-Bevel-325gr-VPA-OSSB2BL.htm

And I seen a bit of info when i searched on lea---- wall
But I can't. Find any length or width specs for them thow
Jim

elkbreath · « **Reply #9 on:** June 19, 2012, 02:05:00 AM »

How sharp out of the box? Im wondering if the blade angles would make them difficult to sharpen?

Any word on theory or literature?

Boomerang · « **Reply #10 on:** June 19, 2012, 06:31:00 AM »

The overall length is 3.1", blade length is 2-5/16". Blade thickness is .055". The offset is streight so they sharpen easy. Since they are single bevel and offset, they really twist going into something.

flyne · « **Reply #11 on:** June 19, 2012, 06:33:00 AM »

Are they avalibel in rw and lw
Jim

flyne · « **Reply #12 on:** June 19, 2012, 06:34:00 AM »

And how wide are they
Cheers Jim

flyne · « **Reply #13 on:** June 19, 2012, 07:17:00 AM »

You can get 315 grain points from ABS and iv seen 10 grain waight washers not to mention loseing some waight when sharpening
the broad head is the cheep bit when u look at the cost of every thing else u need for the hunt
Jim

Boomerang · « **Reply #14 on:** June 19, 2012, 08:41:00 AM »

They are 1-1/8" wide. Left bevel.

Boomerang · « **Reply #15 on:** June 19, 2012, 08:49:00 AM »

The guy's that won't spend $50.00 on a 3 pack of this quality probabably aren't going to spend 5 to $10,000 going to Africa either. Which these are designed for large dangerous game.

flyne · « **Reply #16 on:** June 19, 2012, 08:50:00 AM »

Thanks might have to give them a try

JimB · « **Reply #17 on:** June 19, 2012, 08:57:00 AM »

You can make custom,heavyweight field points by using a 190 glue-on point,steel adapter and a little lead shot up in the ferrule.If you need heavier,add a 75 gr Woody Weight.Tuffhead also has 225 and 300 gr,glue-on field points.

Jake Diebolt · « **Reply #18 on:** June 19, 2012, 05:45:00 PM »

I've yet to have someone explain the benefit of this offset blade thing to me. Can anyone explain the rational? Is it the same as the rotational motion in a single bevel? Any testing to back it up?

Frenchymanny · « **Reply #19 on:** June 19, 2012, 06:08:00 PM »

I take advantage of this thread to point out the courtesy and the excellent service from VPA.

F-Manny


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: VPA Offset 2 Blade Single Bevel 325gr (Read 776 times)

Users currently browsing this topic: