What feather's shape do you prefer?

[DayTripper]

I saw a lots of beautiful arrows on a recent post here. As I was looking through the pictures, I could not help but noticed there aren't many traditional shape feather. So my questions are, what shape do you prefer and why? I myself prefer traditional shape purely for  the look of it and of course, stability.

[Shedrock]

I have been really liking the low profile banana cut the last few years.

[typical2]

[Brock]

I prefer the standard shield shape....but have used Pope and Young cut a few times but I always put them too close to the nock and the tip of feathers makes noise against my fingers.
Below you see first set of gray barred in PY cut; then red in reg shield, and then natural barred in a low profile shield.

   

[Boomerang]

I used to use shield cut, but I find the parabolic is a little quieter.

[m midd]

Modified shield. I burn mine a little different than a standard shield

[stykbow67]

Shield cut for me, No particular reason other than I just like the looks of them!

[Rick Richard]

Shield cut, but I do find that some may be noisy in flight.  I have never had parabolic be noisy though.

[Cyclic-Rivers]

I like a shape that I burn. Its a mix between traditional and pope and young.

If I buy them, I go with shield, just like the look more.

[JamesKerr]

I use Parabolic. It is easier to come by in my area and is a little quieter than shield cut.

[kwc]

i switched to parabolic from shield found them to be quieter

[typical2]

Sorry double post.

[WidowEater]

I usually use parabolic because I can find them easier in pink flourescent yellow.

[AWPForester]

I use the 5 inch shield cut.  They work fine but can be noisier than the parabolic if ruffled.  Parabolc are the quietest.  God Bless

[stickbowmaniac]

4" Parabolic for me

[Sam McMichael]

I mostly shoot shield but also use parabolic sometimes.

[TxAg]

I like the look of shield cut, but my newest arrows are parabolic. As long as they shoot straigh

[bigbadjon]

I used to shoot 5in parabolic but now I've made the switch to a 3in low profile traditional. I like lots of shapes but I insist on lower height than what most shoot.

[LITTLEBIGMAN]

i like these tiny 2 inch razors
 

[riverrat 2]

5" shield cuts.