First Off..Hello Y'all! I'm new to the forums, been bow hunting for a few years, instinctive trad hunting for about 2 years, still have LOTS to learn. Anyways, thought I'd contribute with my home made bow case.
I was helping a friend move and she was tossing out an old violin case, this was shortly after I bought my bow and I needed a case and I thought...hmmm, I can use that, so with a little bit of gutting out and some foam, glue and felt I built myself a great case for my TD bow. I cut the foam so the bow sits nicely inside the foam and is held in there with velcro. the top of the case holds 8 arrows, I may change the top and pull the arrow holder out of my compund case and install into this one, well see. Last year I purchased a quiver for the bow so I may need to alter the foam so it will hold the quiver while on the limbs, right now I have to remove the quiver when I put the bow in the case. Anyways, heres a few pics of the case along with the bow, It's a custom made bow based on the black widow, bulder named it Casper. Draws 65#'s at 28".