Author Topic: quietest shape fletch (Read 596 times)

Tradcat · « **on:** September 04, 2012, 06:24:00 PM »

let's hear your opinions and experiences on WHY you believe a certain fletch shape is the most stealthy and which one is loudest

Big Ed · « **Reply #1 on:** September 04, 2012, 06:25:00 PM »

Parabolic shape usually is the quietest for me. While Banana cut seem to whistle quite a bit.

AWPForester · « **Reply #2 on:** September 04, 2012, 06:39:00 PM »

Parabolic. It is low profile so it is stiffer and it tails off s not to leave a point to rustle in flight. God Bless

wv lungbuster · « **Reply #3 on:** September 04, 2012, 07:28:00 PM »

I think the low profile banana cut is pretty quiet.

Terry Lightle · « **Reply #4 on:** September 04, 2012, 07:33:00 PM »

Parabolic,that being said I shoot shield cut

katman · « **Reply #5 on:** September 04, 2012, 07:33:00 PM »

A&A or low profile banana quiet.
Shields loud

Terry Green · « **Reply #6 on:** September 04, 2012, 07:37:00 PM »

Parabolic are probably the quietest because they don't have an edge....

The low profile shield cut I use is not loud at all, if it was I sure wouldn't use it. Loud doesn't always come from the cut, or length, it also comes from the height as well. 6 inch high backed bananas are loud...as are most 'high back' fletch cuts. I also have some high backed 3.5 inch feathers that are short, but I made them to be loud for shooting demos for kids....they are loud, like in the HH movies.

rick7 · « **Reply #7 on:** September 04, 2012, 08:11:00 PM »

parabolic for me seems to be the quietest

fmscan · « **Reply #8 on:** September 04, 2012, 08:13:00 PM »

I can tell you that Tradional cut is very loud...

Big Ed · « **Reply #9 on:** September 04, 2012, 08:24:00 PM »

I should mention the Banana's I shot were magnums.

2treks · « **Reply #10 on:** September 04, 2012, 09:05:00 PM »

3 rivers T-hawk is quiet.
P&Y= not quiet.

ericmerg · « **Reply #11 on:** September 04, 2012, 11:45:00 PM »

3" parabolic shot with a guy on monday that shot then... i didnt hear the arrow at all

JamesKerr · « **Reply #12 on:** September 05, 2012, 12:45:00 AM »

Parabolics.

Steelhead · « **Reply #13 on:** September 05, 2012, 01:20:00 AM »

Parabolic 3 or 4 inch.

MonRiver · « **Reply #14 on:** September 05, 2012, 01:22:00 AM »

Perfect timing for this thread! I WAS going to order P&Y for my next batch of woodies and switch away from the parabolics, but not now!

2treks · « **Reply #15 on:** September 05, 2012, 05:01:00 AM »

Don't let me scare ya off Lou, The P&Y look the coolest!
How you been man?
CTT

Green · « **Reply #16 on:** September 05, 2012, 05:22:00 AM »

I don't hear anything shooting three 5" low profile banana's that come from Magnus.

Zradix · « **Reply #17 on:** September 05, 2012, 08:41:00 AM »

The quietest are low profile cuts that have well supported rear quills.

A low pro moon is the quietest I've shot.
Just not a lot of steerage there.

High profile "trad" cut is the loudest I've shot.

I've been liking a slightly modified T-hawk chop.
I use 4x4.5" that I cut a little low pro.
Pretty quiet with a good amount of steerage.

Lots of helical can make em loud too.

DayTripper · « **Reply #18 on:** September 05, 2012, 11:30:00 AM »

Quote

Originally posted by fmscan:
I can tell you that Tradional cut is very loud...

Ditto that. But, I like the way they look.

PeteA · « **Reply #19 on:** September 05, 2012, 08:45:00 PM »

4 inch parabolics for me. Really quiet.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: quietest shape fletch (Read 596 times)

Users currently browsing this topic: