Author Topic: Takedown Bow Blanks!!. . .Dryad Bows - PICS (Read 2404 times)

wingnut · « **on:** January 19, 2007, 11:45:00 AM »

After working through the logistics and getting a reliable source for the sleeves, Jason and I are proud to offer a takedown version of our popular bow blank.

The blank will be a modified version of the straight handled blank with a bit more reflex installed. The blank will be trimmed to width through the handles and cut down the middle. We will include the takedown sleeve system along with instructions on the installation.

Our introductory offer will be $175 for the TD osage blank and $225 for the TD yew blank. Also included is a copy of our DVD.
We'll try and get some pics of one up later today.

Mike

Charlie Lamb · « **Reply #1 on:** January 19, 2007, 02:42:00 PM »

That sounds like a hell of a deal Mike!!

wingnut · « **Reply #2 on:** January 19, 2007, 07:32:00 PM »

Thanks Charlie!!

We did this in response to all of the requestes we get from Europe and the inablility to ship there without breaking the bank. I hope they can now take advantage of the blanks. Also the takedown is cool if you travel much.

Mike

EASTERNARCHER · « **Reply #3 on:** January 19, 2007, 08:23:00 PM »

got any pics of one taken down and strung Mike?

wingnut · « **Reply #4 on:** January 20, 2007, 08:44:00 AM »

Wendall,

We have one in progress right now and are waiting on delivery of the sleeves. (should be early next week. . .I hope)

I'll try and work on up and install the sleeve to get the pics for you.

Mike

EASTERNARCHER · « **Reply #5 on:** January 20, 2007, 09:01:00 PM »

Great Mike...should be a great seller for ya too!

Jack Denbow · « **Reply #6 on:** January 21, 2007, 09:09:00 AM »

OH I have been waiting for this. Mike may have finally found a way to pry those dollar bills from my hand.
Jack

Bjorn · « **Reply #7 on:** January 21, 2007, 07:29:00 PM »

Can I get a TD blank with wood to make riser shaped like a Windtalker or Soothsayer? Who installs the TD sleeve?

wingnut · « **Reply #8 on:** January 22, 2007, 06:28:00 AM »

Bjorn,

All of our blanks are in the Hunter style. We can leave the handle square in the one piece so you can shape it. The TD sleeve is pretty straight and can be built up a bit with leather if you want but I don't see a sculpted grip with it.

Mike

Ted Fry · « **Reply #9 on:** January 22, 2007, 03:59:00 PM »

Mike , its very easy to build up the grip of a takedown sleeve with Bondo ( auto body filler)
and then shape it down to desired dimensions.
But this may be something best done by your customer as it is a personal thing on the shape and size . Easy to work down once it is hard with a couple of rasps and some sandpaper.

crashcastle · « **Reply #10 on:** January 22, 2007, 08:44:00 PM »

can a novice put in a takedown sleeve

wingnut · « **Reply #11 on:** January 23, 2007, 08:00:00 AM »

Jason,

Installing a sleeve is as easy as falling off of a horse and a lot less painfull. Rusty and I did an article for PA a couple years back. I'll include a copy with each sale.

Mike

Ryan O'Sullivan · « **Reply #12 on:** January 23, 2007, 08:38:00 AM »

Mike, you should try doing some up with the fiberglass home made sleeve, like the article that was in primitive archer a few years ago, you can shape your handle any way you want then, plus you dont have to hold on to a cold chunk of metal. I did a selfbow up with one a couple years ago and it worked great.

AkDan · « **Reply #13 on:** January 23, 2007, 12:36:00 PM »

Ryan,

I was watching Mikes build video again last nite in preparation of the 2 blanks coming and thought about that sleeved glass article also. Dunno if you could pull it off with a bulbous handle but you definatly could with just about any other handle.

Did you know though that both Fox Archery and Wes Wallace archery are able to do just about whatever style grip you want and they do use the sleeves to boot. They use the smaller sleeve, not sure how they build it up or if they dont just using a milling machine to bore it out???

It's the only thing stopping me at this point from buying a wesley special, or bows that cannot be made with some kind of locator or dished grip and still use a take down mech. Lots of bows out there using the sleeve, that for whatever reason dont or wont attempt to do this.

bjk · « **Reply #14 on:** January 23, 2007, 01:13:00 PM »

Dan -- don't rule out a bow bolt...seemingly, you could put one in just about anything...lots of places using it on recurve type grips.

wingnut · « **Reply #15 on:** January 23, 2007, 03:33:00 PM »

Dan,

The bow bolt is a great way to get a one piece look and feel and the convience of a two piece. The blank doesn't have enough wood in the grip area to support it safely though. That's why we went with the sleeve on this model.

We use the bolt on all the other bows.

Mike

Arwin · « **Reply #16 on:** January 23, 2007, 06:12:00 PM »

Do you have any pics of the blank with the sleeve on?

wingnut · « **Reply #17 on:** February 09, 2007, 02:14:00 PM »

This is how the blank will be delivered.

TD Blank pics:

We will go ahead and finish the install and show the results in a day or so.

Mike

bluegill · « **Reply #18 on:** February 09, 2007, 02:36:00 PM »

Mike,

Kudos on a great idea for the do it yourselfer, let me know when you ar etaking orders. Are you going to sell the sleeve system on its own?

Thanks Sean

wingnut · « **Reply #19 on:** February 09, 2007, 04:16:00 PM »

Sean,

We are taking orders now. I guess I could sell the sleeves too but hadn't thought of it.

Mike


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Takedown Bow Blanks!!. . .Dryad Bows - PICS (Read 2404 times)

Users currently browsing this topic: