3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Beman Centershot vs Axis Trad?  (Read 1641 times)

Offline jkm97

  • Trad Bowhunter
  • **
  • Posts: 594
Beman Centershot vs Axis Trad?
« on: July 26, 2013, 02:00:00 PM »
Is there any difference between these shafts?

Offline neargeezer

  • Trad Bowhunter
  • **
  • Posts: 348
Re: Beman Centershot vs Axis Trad?
« Reply #1 on: July 26, 2013, 02:14:00 PM »
The axis traditional come about a half inch longer, only important if you shoot full length as I do.

Offline jkm97

  • Trad Bowhunter
  • **
  • Posts: 594
Re: Beman Centershot vs Axis Trad?
« Reply #2 on: July 26, 2013, 02:16:00 PM »
Thanks, I cut mine a couple inches anyway. The Bemans are not quite so pricey.

Offline DarkTimber

  • Trad Bowhunter
  • **
  • Posts: 581
Re: Beman Centershot vs Axis Trad?
« Reply #3 on: July 26, 2013, 02:44:00 PM »
The Beman Centershot is a larger diameter (Easton's H Diameter) and takes the HP insert which has a lip on it like a standard insert(not HIT) and they use Easton's H nocks.  The Easton Axis use the HIT insert and the X nock.   The difference in diameter is very slight though.

Offline jkm97

  • Trad Bowhunter
  • **
  • Posts: 594
Re: Beman Centershot vs Axis Trad?
« Reply #4 on: July 26, 2013, 02:47:00 PM »
Gotcha you. I just noticed that myself.

Offline nineworlds9

  • Trad Bowhunter
  • **
  • Posts: 4605
  • Northman
Re: Beman Centershot vs Axis Trad?
« Reply #5 on: July 26, 2013, 04:41:00 PM »
Axis trad is basically the replacement for the Beman MFX
52" Texas Recurve
58" Two Tracks Ogemaw
60" Toelke Chinook
62" Tall Tines Stickflinger
64" Big Jim Mountain Monarch
64" Poison Dart LB
66" Wes Wallace Royal
            
Horse Creek TAC, GA
TBOF

Offline ishoot4thrills

  • Trad Bowhunter
  • **
  • Posts: 3445
Re: Beman Centershot vs Axis Trad?
« Reply #6 on: July 26, 2013, 05:31:00 PM »
Quote
Originally posted by nineworlds9:
Axis trad is basically the replacement for the Beman MFX
Except for the difference in weight.

Beman MFX Classic 500= 9.7 gpi

Easton Axis Trad 500= 8.9 gpi
58" JK Traditions Kanati Longbow
Ten Strand D10 String
Kanati Bow Quiver
35/55 Gold Tip Pink Nugents @ 30"
3 X 5" Feathers
19.9% FOC
49# @ 26.75"
165 FPS @ 10.4 GPP (510 gr. hunting arrow)
171 FPS @ 9.7 GPP (475 gr. 3D arrow)
3 Fingers Under

Offline Bill Carlsen

  • Trad Bowhunter
  • **
  • Posts: 3928
Re: Beman Centershot vs Axis Trad?
« Reply #7 on: July 26, 2013, 05:37:00 PM »
The Beman Bone  Collector series is nothing but a dressed up MFX.
The best things in life....aren't things!

Offline Sirius Black

  • Trad Bowhunter
  • **
  • Posts: 1404
Re: Beman Centershot vs Axis Trad?
« Reply #8 on: July 26, 2013, 06:59:00 PM »
I shoot the CenterShots and really like them. Full length they were 31 1/2", but I use them at 31" even, so no problem (400 spine).
Wisconsin Bowhunters Association - Life Member

Offline nineworlds9

  • Trad Bowhunter
  • **
  • Posts: 4605
  • Northman
Re: Beman Centershot vs Axis Trad?
« Reply #9 on: July 26, 2013, 07:23:00 PM »
Quote
Originally posted by ishoot4thrills:
 
Quote
Originally posted by nineworlds9:
Axis trad is basically the replacement for the Beman MFX
Except for the difference in weight.

Beman MFX Classic 500= 9.7 gpi

Easton Axis Trad 500= 8.9 gpi [/b]
YES!  I'm going to miss the MFX for sure.  My favorite arrows!  Skinny and heavy, and EASY to tune!!
52" Texas Recurve
58" Two Tracks Ogemaw
60" Toelke Chinook
62" Tall Tines Stickflinger
64" Big Jim Mountain Monarch
64" Poison Dart LB
66" Wes Wallace Royal
            
Horse Creek TAC, GA
TBOF

Offline LimBender

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1080
Re: Beman Centershot vs Axis Trad?
« Reply #10 on: July 26, 2013, 10:56:00 PM »
I am hunting with center shots, cheaper and not a big HIT fan were my main reasons - a nice arrow!  Also comes with the 50/75 brass inserts.
>>>---TGMM Family of the Bow--->

Shoot some Zippers and a Bear.

Offline Brianlocal3

  • Trad Bowhunter
  • **
  • Posts: 4846
Re: Beman Centershot vs Axis Trad?
« Reply #11 on: July 26, 2013, 11:32:00 PM »
I too am not a fan of the HIT system so I tried the centershot and they are fantastic arrows. I'm cheap though so I stuck with my ICS hunters
JD Berry Taipan (original) 53@28 62”
Cascade mountain Brush Hawk 53@28 56”

Offline Pheonixarcher

  • Trad Bowhunter
  • **
  • Posts: 1224
Re: Beman Centershot vs Axis Trad?
« Reply #12 on: July 27, 2013, 01:18:00 AM »
Can someone give the actual difference in diameter on these shafts please? I'd like to try the smaller diameter, but am not a big fan of the HIT inserts either. Also, which shaft is easier to find footing for? Thanks.
Plant a fruit or nut tree today, and have good hunting tomorrow.
=}}}}}-----------------------------}>

Offline LimBender

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 1080
Re: Beman Centershot vs Axis Trad?
« Reply #13 on: July 27, 2013, 11:48:00 AM »
Don't have measurements, but It is a really small difference between the two and they both use 9/32 points.  The Centershot uses same inserts and nocks as the old ST Epics (maybe same shaft), and is clearly thinner than other arrows like GT Trad, Trad Only, and CX Heritage.
>>>---TGMM Family of the Bow--->

Shoot some Zippers and a Bear.

Offline Sirius Black

  • Trad Bowhunter
  • **
  • Posts: 1404
Re: Beman Centershot vs Axis Trad?
« Reply #14 on: July 27, 2013, 11:51:00 AM »
I think the Beman Centershot is 9/32. Plenty thin enough I think.
Wisconsin Bowhunters Association - Life Member

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©