3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: A&H ACS Dynamic Spine?  (Read 384 times)

Offline toby

  • Trad Bowhunter
  • **
  • Posts: 229
A&H ACS Dynamic Spine?
« on: August 26, 2013, 07:31:00 AM »
I have a 39#@28", 62" bow on the way. I draw 29". When I run the numbers through the 3 Rivers spine calculator I get a Dynamic Spine of 67. My Pinnacle 2 with 46.5# limbs has a Dynamic Spine of 55.

Can the ACS have that much more? Maybe the calculator is making an error.

I ask because I am trying to determine what arrows to get.

Do these ACS bows have that much more potential in them?
TOBY

Offline Big Sneaky

  • Trad Bowhunter
  • **
  • Posts: 346
Re: A&H ACS Dynamic Spine?
« Reply #1 on: August 26, 2013, 07:41:00 AM »
From my experience yes.  Seems when you combine high performance limbs and the fact that the riser is cut past center, it requires a way stiffer spined arrow.  My current setup is an ACS CX that is 54# at my 30 1/2" draw.  I shoot Easton FMJ 300's with 150 grain point.
Always keep the wind in your face, and an arrow nocked.

Offline toby

  • Trad Bowhunter
  • **
  • Posts: 229
Re: A&H ACS Dynamic Spine?
« Reply #2 on: August 26, 2013, 08:08:00 AM »
Big Sneaky,

Thanks, that must be a sceamer.

Toby
TOBY

Offline JRY309

  • Trad Bowhunter
  • **
  • Posts: 4383
Re: A&H ACS Dynamic Spine?
« Reply #3 on: August 26, 2013, 08:42:00 AM »
My A&H ACS takes a stiffer spine then my other bows of similar weight.I even built out my side plate,I believe A&H risers are cut 3/16" past center.

Offline Kris

  • Trad Bowhunter
  • **
  • Posts: 791
Re: A&H ACS Dynamic Spine?
« Reply #4 on: August 26, 2013, 09:05:00 AM »
Yes, they do have that much more "potential".  I can easily shoot CX 75/95's out of either my 51# or my 54# ACS.  I also shoot MFX 340 out of either.  What works best are the 400's Nanos or the MFX.  I draw 28".  

I typically front load 300gr. - 400gr. so stiffer is better in my case.  Many other tuning adjustments influence what one can shoot,  ABT (Always Be Tinkering)   ;)  

Kris

Offline toby

  • Trad Bowhunter
  • **
  • Posts: 229
Re: A&H ACS Dynamic Spine?
« Reply #5 on: August 26, 2013, 10:29:00 AM »
So is it that they are cut that much past center or the limb design that gives them more potential.

Kris, I like that "ABT".

Toby
TOBY

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: A&H ACS Dynamic Spine?
« Reply #6 on: August 26, 2013, 12:29:00 PM »
Both, you will still be able to shoot a .600 spine At 30 inches with 175 grain point, if you go to .500 spine you will need lots of point weight and a 30 inch arrow, around 300 grains. Those calculators have everyone overspined! Shawns
Shawn

Offline fz4vgq

  • Trad Bowhunter
  • **
  • Posts: 274
Re: A&H ACS Dynamic Spine?
« Reply #7 on: August 26, 2013, 07:38:00 PM »
1 piece or 3 piece ?

The 1 piece bows are cut 1/16" past center but with the 1/8" thick Velcro shelf material it brings it to +1/16" .

Offline Caughtandhobble

  • Trad Bowhunter
  • **
  • Posts: 1661
Re: A&H ACS Dynamic Spine?
« Reply #8 on: August 26, 2013, 09:31:00 PM »
The 41# ACS that I had shot 500 spine 29.75" with 125 grain perfect and I have a 29" draw also. Good luck, I don't think I would try a 600 spine arrow having a 29" draw lenth.

Offline toby

  • Trad Bowhunter
  • **
  • Posts: 229
Re: A&H ACS Dynamic Spine?
« Reply #9 on: August 26, 2013, 09:34:00 PM »
It's a one piece.

Caught, thanks for the arrow info.

Toby
TOBY

Users currently browsing this topic:

0 Members and 3 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©