Mohawk longbow brace height question

[Jim Espinosa]

I was hoping someone could tell me recommended brace height for my 64" mohawk longbow. I can't find the paperwork the bow came with and I have it at 7 1/8" but somehow my nocking point is really high. I'm not sure if my nocking point slid up my string. I haven't been shooting much and want to get the bow set close to spec. Thanks

[dnovo]

I have several Mohawks and I keep the nocking point at around 6 1/2 to 6 3/4 fro0m the rear of the riser at the rest. Works well for me there.
You can experiment with it and see if there nis a spot it seems to shoot better from.

[ron w]

My Take down I run 6 3/4-7"

[Bladepeek]

I have a one marked 66" that works well  at 6 3/4 - 7". I'm using 64" string; measuring brace height to the lowest part on the grip.

[Brock]

so you guys are not measuring from lowest point of grip....but rather back of riser?

i have been running mine (Sparrowhawk) 7" from deepest part of the locator grip...seems to be good

[Jim Espinosa]

Thanks to all. Just got back in from shooting but need to wait for daylight to really check arrow flight.