looking for a single bevel bh.

[jrchambers]

im looking for a solid one piece screw in 175 to 225gr.

[Kevin Dill]

Abowyer Wapiti is 175 gr and 1-3/8 wide, but it's a glue-on. Abowyer makes other screw-in heads and are a long-time TG sponsor.

[jrchambers]

im trying to avoid inserts if possible. I thought vpa made one but I cant find it

[Prairie Drifter]

Steel force. 3 rivers has them

[Kevin Dill]

As an aside: Adapters installed with JB Weld are basically not going to ever break or move. Titanium and steel adapters are very strong.

[Will Cocke 2]

Simmons will make you a single bevel if asked to.

[beachbowhunter]

Werewolf

[SAVIOUR68]

Helix

[jrchambers]

oh cool hvnt seen the warewolfs yet.

[Meathook 1]

X2 What Widowdoublelung said.Dave at Simmons is a good man to deal with.And great Broadheads.

[nineworlds9]

Centaur Big Game!

[onewhohasfun]

Tuffhead.

[Blaino]

Grizzly is the best bang for your buck hands down.

[30coupe]

Originally posted by Blaino:
Grizzly is the best bang for your buck hands down.

Grizzly + JB Weld + steel insert = indestructible

...and economical to boot.

[Wetfeet]

Grizzly , time tested, Dr. Ashby approved. And will pass through with lower weight bows better than most due to the 3:1 ratio.

[RC]

Grizzly or Zwickey no mercy.RC

[DarkTimber]

If you do decide to go with a glue on and insert I will second Kevin's recommendation for the Abowyer Wapiti.  Here is one mounted on a 50gr titanium adapter with 25 gr of lead added in the hollow part of the adapter to make a 250 gr head.  You could skip the lead and be at 225 gr. They are an excellent head and come scarry sharp out of the pack.


 


You could also go with a 160 gr Grizzly and 75 gr steel adapter and be at 235 gr.  They are excellent as well and although they don't come as sharp out of the package it only takes about 2 minutes to get them that way.  Both Abowyer and Grizzly have excellent customer service, I don't think you could go wrong with either.  

Looks like you have lots of choices.  Good Luck!

[jrchambers]

225 Is the absolute heaviest for this set up, I really want 175 or 200 one piece, kinda looking like there is no such thing yet.  I have some of the setups you all have talked about on some other shafts.
as for those new badger heads they appear to be a bit backwards as the way they would want to spin it seems like the bevel should be on the other side of the blade.  am I right that the arrow will rotate away from the bevel and the offset of the blade indicates rotation twards the bevel.

[Montanawidower]

There is one but it is very expensive.  Alaska Bowhunting makes two heads.   One is convex and one is straight.  Both come in 175-200 grains. Masai and the Samurari ?  Don't quote me, it has been a while since I looked at them.   You will pay about 30 bucks a piece for them though.   I shoot the Abowyer brown bear for whitetails and the tuffhead on elk.

[jrchambers]

thanks I looked at the samurai, it is expensive but it also has a aluminum ferrule