3Rivers Archery



The Trad Gang Digital Market












Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


« previous next »
Pages: [1]   Go Down

Author Topic: Tuning with field points  (Read 477 times)

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Tuning with field points
« on: September 12, 2007, 11:05:00 AM »
Can someone answer me a real quick question? If my fletched and field pointed arrows are flying right, does that mean they're too weak, or too stiff. I'm right handed. I'm trying to tune a set of arrows to match the arrows I'm shooting now & can't remember whether I need to cut them down, or weight them up!

Having a bit of an 'off' day, mentally   :knothead:
Logged
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline Molson

  • Trad Bowhunter
  • **
  • Posts: 1582
Re: Tuning with field points
« Reply #1 on: September 12, 2007, 11:06:00 AM »
That would be weak.
Logged
"The old ways will work in the future, but the new ways have never worked in the past."

Offline TimZeigler

  • Trad Bowhunter
  • **
  • Posts: 986
Re: Tuning with field points
« Reply #2 on: September 12, 2007, 12:22:00 PM »
second vote for Weak.
Logged
USMC 1992-2000
PBS Associate Member

Offline Aggie1993

  • Trad Bowhunter
  • **
  • Posts: 468
Re: Tuning with field points
« Reply #3 on: September 12, 2007, 12:54:00 PM »
Weak
Logged
Phil 4:13 "I can do all things through Christ who gives me strength."

Kempf Trophy Hunter 58" 51@28
Kempf Kwyk Styk 58" 51@28
Kempf Kwyk Styk 58" 54@28
Kempf Trophy Hunter 58" 51@28

Offline hill boy

  • Trad Bowhunter
  • **
  • Posts: 627
Re: Tuning with field points
« Reply #4 on: September 12, 2007, 03:26:00 PM »
strip the ftetching off and try it.Then see if it is still weak.
Logged
Your best shot is only as good as your next one!

Offline MikeC

  • Trad Bowhunter
  • **
  • Posts: 222
Re: Tuning with field points
« Reply #5 on: September 12, 2007, 03:33:00 PM »
Weak.  What hill boy suggested, but I would go back no further than 10 yards maybe less depending on the size of you target.  Properly tuned bareshafts should be slightly weak as the fletching will stiffen them up a bit.

If your release is ok you should be able to shoot properly tuned bareshafts from 20 yards no problem.
Logged
1 Corinthians 1:18

For the word of the cross is to them that perish foolishness; but unto us who are saved it is the power of God.

Offline IB

  • Moderator
  • Trad Bowhunter
  • ***
  • Posts: 2172
Re: Tuning with field points
« Reply #6 on: September 12, 2007, 04:51:00 PM »
Hay RedNeck.....Just for me and some Giggles add a wee bit of weight up front and see what ya get  :bigsmyl:
Logged

Offline JEFF B

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 8246
Re: Tuning with field points
« Reply #7 on: September 12, 2007, 04:59:00 PM »
the reason why  your having an off day is your thinking to much about buying your ranch  rob. or is that meeting elvis? LOL!!!   :D
Logged
'' sometimes i wake up Grumpy;
other times i let her sleep"

TGMM FAMILY OF THE BOW

Offline Gil

  • Trad Bowhunter
  • **
  • Posts: 756
Re: Tuning with field points
« Reply #8 on: September 13, 2007, 11:41:00 AM »
Are you shooting fletched arrow with broadheads and fletched arrows with field points or fletched arrows with field points and bareshafts with field points? It might be just me but I am a little confused with the statement you made.My experience is also limited only to bareshaft tuning with fletched and unfletched arrows like in OL's website.

Gil
Logged
There's plenty of room for all of God's creatures.Right next to the mashed potatoes.

One can pay back the loan of gold, but one dies forever in debt to those who are kind."

COMPTON TRADITIONAL BOWHUNTERS

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Tuning with field points
« Reply #9 on: September 13, 2007, 12:16:00 PM »
No bareshafts at all. These are purely target arrows & won't be fitted with broadheads.
My setup is just fletched arrows with field points fitted. They're flying around 10" to the right at 25yds, but grouping fine. What do I need to do to get them to fly to the centre?
Logged
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline Gil

  • Trad Bowhunter
  • **
  • Posts: 756
Re: Tuning with field points
« Reply #10 on: September 13, 2007, 01:03:00 PM »
Not really sure Rob, but you can try lessening the cant of your bow when you shoot to move the greouping to the left.Have you tuned your bow to these arrows.I would adjust my sight if this was my olympic style recurve.  :knothead:    :bigsmyl:  

Gil
Logged
There's plenty of room for all of God's creatures.Right next to the mashed potatoes.

One can pay back the loan of gold, but one dies forever in debt to those who are kind."

COMPTON TRADITIONAL BOWHUNTERS

Offline jimneye

  • Trad Bowhunter
  • **
  • Posts: 211
Re: Tuning with field points
« Reply #11 on: September 13, 2007, 01:42:00 PM »
build out your strike plate a bit.
Logged
I've hunted almost every day of my life.....the rest were just wasted

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Tuning with field points
« Reply #12 on: September 13, 2007, 05:26:00 PM »
Don't really want to alter the bow as I've got 3 dozen arrows flying perfectly. My trouble is that I'm trying to make up some really light weight pine shafts. The bow is 71# at my 29" draw length. I've been shooting 75# 11/32" Pines arrows cut to 31" with 125gn field points.
What I want to do is build up a set of 5/16 using 30-50gn points. I bought a dozen 48# 5/16" shafts & I'm just trying to dial them in. The idea being that the lighter the arrow, the flatter & faster it'll fly giving me more margin for error in my range estimation.
They're for shooting at 3D courses which typically (over here) give an average distance of 40yds & can stretch out to 100yds!

This is all purely experimental, I'm perfectly happy with my big ol' 11/32"ers, I'm just tryingto gain as much advantage as possible (we ain't allowed to shoot carbons in my class  :( )
Logged
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline Molson

  • Trad Bowhunter
  • **
  • Posts: 1582
Re: Tuning with field points
« Reply #13 on: September 13, 2007, 06:38:00 PM »
48# spine shafts out of a 71# bow??  I don't think it's going to happen Rob.

Why not try 75#-80#er's and full length taper them from 11/32 to 5/16.  Burnish them and just put a light surface sealer on.  They should come in light for you and spine ok too.
Logged
"The old ways will work in the future, but the new ways have never worked in the past."

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Tuning with field points
« Reply #14 on: September 13, 2007, 06:44:00 PM »
Well, I thought it might be a long shot, but I had to try!  :D  I regularly shoot with a guy who shoots 32# arrows from a 53# bow with 30gn points, I thought I may be able to just scale it up a little.
Logged
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline robtattoo

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 3588
Re: Tuning with field points
« Reply #15 on: September 13, 2007, 06:45:00 PM »
A full length taper's going to be my next step, I'm just not too sure how to do it!
Logged
"I came into this world, kicking, screaming & covered in someone else's blood. I have no problem going out the same way"

PBS & TBT Member

>>---TGMM, Family of the Bow--->

Offline hill boy

  • Trad Bowhunter
  • **
  • Posts: 627
Re: Tuning with field points
« Reply #16 on: September 13, 2007, 07:51:00 PM »
Bare shaft your arrows first this will give you a starting point.When fine tuning change one item at a time.shorter arrows,more wieght up front,if you want longer arrow's etc.But you need to bareshaft first.15yd is where I start.good luck
Logged
Your best shot is only as good as your next one!
Pages: [1]   Go Up
« previous next »

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©