3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: 125 gr Wensels?  (Read 302 times)

Offline longstick

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 541
125 gr Wensels?
« on: September 13, 2007, 08:54:00 PM »
Are these all glue on? Ive looked all over the net and all I see are the 125s.I figure by the time I add the weight of the adapter Im coming out about the same as shooting my 150s,,is there an advantage to this or am I just missing it?
>>-TGMM Family of the Bow-->

Offline STRAYARROW

  • Trad Bowhunter
  • **
  • Posts: 35
Re: 125 gr Wensels?
« Reply #1 on: September 13, 2007, 09:37:00 PM »
as far as I know the 125 gr. are all glue on if you want screw in you have to go with the 150 gr.
which are the 125gr. with aluminum adapters.
Tracy

Offline longstick

  • TGMM Member
  • Trad Bowhunter
  • ***
  • Posts: 541
Re: 125 gr Wensels?
« Reply #2 on: September 13, 2007, 09:57:00 PM »
Looks like if I want to shoot 125 Im going to have to shoot my cedars then
>>-TGMM Family of the Bow-->

Offline Jwilliam

  • Trad Bowhunter
  • **
  • Posts: 2926
Re: 125 gr Wensels?
« Reply #3 on: September 13, 2007, 10:00:00 PM »
Strayarrow,is right. 125gr. glue-on or 150 screw-in.

Bill

Offline Biggie Hoffman

  • SRBZ
  • Trad Bowhunter
  • ***
  • Posts: 3336
Re: 125 gr Wensels?
« Reply #4 on: September 14, 2007, 06:44:00 AM »
???? Longstick, you're right that if you want to shoot 125 you'll have to shoot cedars or swaged aluminum but just out of curiosity, what's the diff??   Nobody shoots THAT good that they can tell the diff in 25 grains of point weight. Except maybe Robert Carter........
PBS Life Member
Member 1K LLC

"If you are twenty and aren't liberal you don't have a heart...if you're forty and not conservative you don't have a brain".....Winston Churchill

Offline James Wrenn

  • Trad Bowhunter
  • **
  • Posts: 1933
Re: 125 gr Wensels?
« Reply #5 on: September 14, 2007, 07:16:00 AM »
You can also use a glue-in adapter instead of the threaded insert on most sizes of aluminum and carbon shafts if point weight is that critical.Personally I would just tune the bow to the 150gn weight and shoot them.As Biggie says it should not matter if your bow is tuned to the middle of the spine rage it shoots anyway.jmo
....Quality deer management means shooting them before they get tough....

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©