3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: arrow for my Whip bow  (Read 399 times)

Offline canuck4570

  • Trad Bowhunter
  • **
  • Posts: 329
arrow for my Whip bow
« on: January 23, 2014, 04:05:00 PM »
just received my Whip bow
36# at 29 inches and 64 long cut 1/16 past centre

spoke with Dan and he told me Easton Legacy 1916 was to stif for this bow ( like some of you told me ) he told me on this low poundage bow you ca go down to 8 gpp with no arm to the bow

he suggested going down one notch

tel me you opinion on this arrow I work out on the 3rivers calculator
Easton X7 1814  29.5 inches with 50gr point +14 gr insert total 64  with 4 inches feathers total weigh of arrow is 339 gr
on the calculator it come to 50.5 to 50.3

Offline LEWIS VADEN

  • Trad Bowhunter
  • **
  • Posts: 139
Re: arrow for my Whip bow
« Reply #1 on: January 23, 2014, 04:30:00 PM »
Dan has always been exactly on the money when I have asked questions.  I have a Whip and Super D.

Offline canuck4570

  • Trad Bowhunter
  • **
  • Posts: 329
Re: arrow for my Whip bow
« Reply #2 on: January 23, 2014, 04:33:00 PM »
I think to FOC is to low 6.2   mmmmm
may be should try 1914
will try it on the calculator
thanks

Offline Bladepeek

  • Trad Bowhunter
  • **
  • Posts: 3318
Re: arrow for my Whip bow
« Reply #3 on: January 23, 2014, 05:26:00 PM »
I'm shooting 1716s out of my longbow, 33# @ 28 and I'm drawing around 28 1/2". With 100 grain points they really fly nice, but they're right at the top edge of stiffness for that bow. I could shoot 125gr points and probably be right on.
60" Bear Super K LH 40#@28
69" Matt Meacham LH 42@28
66" Swift Wing LH 35@28
54" Java Man Elk Heart LH 43@28
62"/58" RER LXR LH 44/40@28

Offline FJTOYMAN

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 241
Re: arrow for my Whip bow
« Reply #4 on: January 23, 2014, 05:42:00 PM »
FWIW
I have a 40 @29" Lynx. 64" So its real close to your bow. All my arrows are full length.
For tournaments I shoot a CX predator 2 in a 700 spine and a 125 tip.
For hunting I shoot a CX Heritage 90 with 200 grain broad head.
Both fly really good for me.

Offline canuck4570

  • Trad Bowhunter
  • **
  • Posts: 329
Re: arrow for my Whip bow
« Reply #5 on: January 23, 2014, 05:46:00 PM »
Bladepeek  and FJTOYMAN

if I put your arrows in the calculator they are to weak

and there you say they fly great….

so I should not trust to much the spine Calculator chart ?

Offline wapiti

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 482
Re: arrow for my Whip bow
« Reply #6 on: January 23, 2014, 07:02:00 PM »
Something with a deflection around 650 should work using 100-125 grain point weight. Start full length and cut back 1/4" at a time until satisfied with your arrow flight. I am thinking a 100 grain point would give the better arrow flight. DO NOT BARE SHAFT TUNE until you are totally familiar with the bow. This goes for all bows when bare shaft tuning.
“Diplomacy is the art of saying 'Nice doggie' until you can find a rock.”-Will Rogers

Offline canuck4570

  • Trad Bowhunter
  • **
  • Posts: 329
Re: arrow for my Whip bow
« Reply #7 on: January 23, 2014, 07:46:00 PM »
I tried some bare shaft 1916 with 125 gr tip and 15 gr insert
the arrow where 29 3/4
 this in my garage a 15 feet and the nock alway ended a bit on the right side which for a left hand shooter is week spine
I practice a bit with the same arrow and they where all niside 2 inches
this arrow is according to Easton 628
and when I tried the same arrow with feathers well no go
it hit the riser often…..
guess I have to practice my form a bit

Offline Keb

  • Trad Bowhunter
  • **
  • Posts: 415
Re: arrow for my Whip bow
« Reply #8 on: January 23, 2014, 09:56:00 PM »
I'm shooting a 58 inch whip 40lbs at my 27 3/4 inch draw and finally found the right arrows

Easton axis trad 600 spine cut to 28.5 60 grain insert with 145 grain head is what it loves.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©