3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Adapters??  (Read 467 times)

Offline trapperjay

  • Trad Bowhunter
  • **
  • Posts: 29
Adapters??
« on: February 01, 2014, 08:53:00 PM »
Have new broadheads (ACE) and aluminum adapters. No matter what I try, I cannot get them to spin true.i've tried different broadheads on the same arrows and they spin true. Where is the weak link, the adapters or heads?

Offline BuckeyeGuy

  • Trad Bowhunter
  • **
  • Posts: 344
Re: Adapters??
« Reply #1 on: February 01, 2014, 11:16:00 PM »
Did you install the heads yourself or did they come installed?  Try heating them up and re-seating as it may be an excess glue problem.  They should spin true.  

Also, if they are the short adapters those can cause fits sometimes too.  The long adapters seat better.

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: Adapters??
« Reply #2 on: February 02, 2014, 11:11:00 AM »
Sometimes it is the broadhead's ferrule but you can get any of them to spin true.The easiest and most precise way for me is to use an alignment jig.With a jig,you can see exactly how far off center the tip is and in exactly which direction it is off.
 http://www.singlebevelbroadheads.com/Mounting_Aligning_the_Tuffhead.html

Offline trapperjay

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Adapters??
« Reply #3 on: February 02, 2014, 01:22:00 PM »
Thanks, I just cut my finger monkeying with them! I'm using the long adapters but do not have an alignment jig yet.

Offline trapperjay

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Adapters??
« Reply #4 on: February 02, 2014, 01:26:00 PM »
Yes, i'm installing the adapters myself w/ hot melt.

Offline JimB

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3778
Re: Adapters??
« Reply #5 on: February 02, 2014, 01:53:00 PM »
You can make a simple one with wood or whatever.It doesn't need to be fancy.Two "V" blocks and a reference point is all it takes.

Offline SlowBowinMO

  • Trad Bowhunter
  • **
  • Posts: 2540
Re: Adapters??
« Reply #6 on: February 02, 2014, 01:59:00 PM »
The most common mistakes are using too much glue and not getting everything hot enough.
"Down-Log Blind at Misty River"

Offline hart2hart

  • Trad Bowhunter
  • **
  • Posts: 166
Re: Adapters??
« Reply #7 on: February 02, 2014, 02:54:00 PM »
Seemed I ran into this several years ago.(slept since then)
Either the short adapter or a small diameter shaft let the back of the broadhead seat too deep and contact insert or shaft and not the taper.
11/32nds on a 5/16th shaft.Think I lightly ground
the back of the broadhead,but I'm not sure..been too long.
Mike

Offline trapperjay

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Adapters??
« Reply #8 on: February 02, 2014, 06:56:00 PM »
Wel, I screwed up and "thought" I had two of them perfectly aligned so i superglued vs using hotmelt like a fool. I wanted to use something different. Why? I dont know! Anyway, I got four stitches to go with the frustration. About the adapters, I noticed they do not fit flush but stick out of the broadhead about 1/8".

Offline Beau J

  • Trad Bowhunter
  • **
  • Posts: 81
Re: Adapters??
« Reply #9 on: February 02, 2014, 08:38:00 PM »

My son and his Robin Hood shot at a 3D shoot in Springfield MO last weekend. BeauJ

Offline Beau J

  • Trad Bowhunter
  • **
  • Posts: 81
Re: Adapters??
« Reply #10 on: February 02, 2014, 08:40:00 PM »
Opps I put that in the wrong thread. I'm not real savy at this. Can some one tell me how to delete this? BeauJ

Offline trapperjay

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Adapters??
« Reply #11 on: February 02, 2014, 09:03:00 PM »
No matter... still a fantastic shot.

Offline Beau J

  • Trad Bowhunter
  • **
  • Posts: 81
Re: Adapters??
« Reply #12 on: February 02, 2014, 09:16:00 PM »
He was sure happy.. maybe the Mods can delete that pic for me? I need to pay more attention to what I'm doin instead of watchin the ball game

Offline trapperjay

  • Trad Bowhunter
  • **
  • Posts: 29
Re: Adapters??
« Reply #13 on: February 02, 2014, 09:23:00 PM »
Ha! What a yucky game no matter who you are goin for.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©