Author Topic: 3 blade Grizzly update final product picture on page 7 (Read 3420 times)

zipper bowss · « **Reply #120 on:** March 21, 2014, 08:36:00 PM »

Gotcha, Steve. That original color was what we wanted for the head. The color they ended up was the nearest "stock" color of Teflon the coaters could get. They could have matched it to the original rendering.It would have been a custom color and more expensive. So we went with the "stock" color.

2treks · « **Reply #121 on:** March 21, 2014, 08:43:00 PM »

Um, yeah. I like that ALOT! I don't care what color or weight they are. I can make em work, and they will all turn red eventually.

I guess its only right that you drew first blood with your new head eh Bill?
I wait patiently.

saltwatertom · « **Reply #122 on:** March 21, 2014, 08:51:00 PM »

The weight sounds perfect for my setup, and the color, well
(Two Tracks beat me to it),it doesn't matter, mine all turn red after hunting with them.

They are beauties.

Sockrsblur · « **Reply #123 on:** March 21, 2014, 11:49:00 PM »

It's been a treat to be able to follow your progress through the process. Thank you for all the posts and photos Bill, I have enjoyed them for sure.

Al Kidner · « **Reply #124 on:** March 22, 2014, 05:48:00 AM »

Best of luck with all this Bill.. Im sure they will be as good as all your other products mate!

Is there any chance of getting a pic alongside one of your two blades mate for a comparison in size?

ak.

zipper bowss · « **Reply #125 on:** March 22, 2014, 08:49:00 AM »

Here you are, Al. Not the best picture but it does give a reference to size.
Grizzly on the top, Instinct in the middle, Kodiak on the bottom

Overspined · « **Reply #126 on:** March 22, 2014, 03:15:00 PM »

Nice job. You have taken ALL of the Griz lines to a new level. Those look like tank strong 3 blade heads!

Over&Under · « **Reply #127 on:** March 22, 2014, 10:15:00 PM »

Looking good Bill

Al Kidner · « **Reply #128 on:** March 23, 2014, 04:23:00 AM »

Cheers for that Bill… again mate standing behind your product ten fold!

I'll be putting in an order for my BC bear hunt in June.

Cheers again,

ak.

cacciatore · « **Reply #129 on:** March 23, 2014, 04:57:00 AM »

Yes the color is secondary as well as few grains more or less,with all the options we have on adapters.
What is important is how easy they are to make them scary sharp,and I am sure Bill worked hard for have this done.

frassettor · « **Reply #130 on:** March 23, 2014, 09:20:00 AM »

Bill, these look awesome man! I love the Grizzlies, cant wait till I try these. Will you have some sharpening tips on your website?. I have difficulty sharpening 3 blade heads.

Sixby · « **Reply #131 on:** March 23, 2014, 01:44:00 PM »

Bill I said it earlier and want to repeat so I definitely get on the list. I want a dozen of these heads. the 190 are perfect.

God bless, steve

zipper bowss · « **Reply #132 on:** March 23, 2014, 03:14:00 PM »

Sharpening could not be easier. All you need is a flat stone. With light pressure just push it back and forth counting each stroke. I started with 25 strokes, flip the head, 25 strokes, flip. Once all 3 sides got 25 strokes I then went to 20 then 15 then 10 then 5. Next was 2 strokes forwad only on each blade then 1 stroke forward on each blade. I repeated the 1 stroke on each blade 3 times. Thats all it took to make the head shaving sharp. To make it hunt ready I pulled it backwards over leather rotating just like before. NOW its ready to hunt!

Your on the list, Steve. As soon as the rest of my custom parts get here to finish the grinder. I'll get this batch ground and start filling the orders of those on the list.

These heads will be sold as a 3 pack. If you want 6 I can get them all in one package for you.They will be $27.50 per 3 pack.

taxyman · « **Reply #133 on:** March 23, 2014, 05:24:00 PM »

Looking good Bill...that looks like a good head to take on my Moose hunt this year! I like the weight too! Thanks for all the info!

Looper · « **Reply #134 on:** March 23, 2014, 10:15:00 PM »

When can we place an order? Forgive me, if you've also told us.

Jake Scott · « **Reply #135 on:** March 23, 2014, 10:25:00 PM »

I too, will place an order as soon as possible. Don't want to be pushy, I will wait if need be. Congrats sir, that looks to be a great head. I would love to support your business

Jake

zipper bowss · « **Reply #136 on:** March 24, 2014, 08:11:00 AM »

Quote

Originally posted by looper:
When can we place an order? Forgive me, if you've also told us.

Not a problem. I do have a list of folks that want to reserve broadheads from this first run. About 1/3 of this first batch are spoken for at this point so we still have plenty available. If you want on that list all I need is for you to say to add you and how many heads you would like.
It take a couple of weeks to get the grinder all sorted out. I'm sure.
Bill

CRS · « **Reply #137 on:** March 24, 2014, 11:25:00 PM »

Bill,
I have been following this thread, fascinated with what it takes to get a "new" product to market.

I would like a dozen of these first run 190-194gr broadheads as well.

Chad

zipper bowss · « **Reply #138 on:** March 25, 2014, 08:33:00 AM »

Thanks, Chad. I have you on the list.

Hermon · « **Reply #139 on:** March 25, 2014, 08:36:00 AM »

Bill-
I would take a half dozen of them. Thanks.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: 3 blade Grizzly update final product picture on page 7 (Read 3420 times)

Users currently browsing this topic: