3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Spine tolerant  (Read 278 times)

Offline bartcanoe

  • Trad Bowhunter
  • **
  • Posts: 303
Spine tolerant
« on: March 13, 2014, 08:30:00 PM »
I posted earlier about wanting to shoot wood arrows our of my new-to-me 70" Two Tracks Echo 64@28 (drawn to 29.5)

To that end, I ordered a 3Rivers Hunter Arrow Test Kit cut BOP 31", fletched and with 190gn point up front.

The kit had 8 arrows.  

2 - 65-70 spine, weight 570gn and 624gn
2 - 70-75 spine, weight 632gn and 604gn
2 - 75-80 spine, weight 672gn and 618gn
2 - 80-85 spine, weight 620gn and 636gn

With these arrows (minus the 570 gn, 65-70), I headed to the range.  To my surprise, with the exception of a few flyers the arrows consistently grouped together (within my poor shooting abilities).

This makes me think that I could add some more weight out front on the 80-85 spine, and be set with the right spine and the weight of arrow I'm looking for.
Dave

US Army Retired (1984-2013)
Job 42:1-6

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8260
  • Contributing Member
Re: Spine tolerant
« Reply #1 on: March 13, 2014, 09:09:00 PM »
Yep.  Most bows are quite spine tolerant.  They'll shoot a range of spines to the bull, and look good doing it, if we do our part.

Offline gringol

  • Trad Bowhunter
  • **
  • Posts: 1534
Re: Spine tolerant
« Reply #2 on: March 13, 2014, 09:59:00 PM »
Try the test again with broadheads.  Any spine problems will jump out.  Fletched arrows with field points are very for giving; bhs not so much.

Online Stumpkiller

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 3873
Re: Spine tolerant
« Reply #3 on: March 13, 2014, 11:00:00 PM »
With a centershot recurve you can get away with a wide spine range - especially overspined.
Charlie P. }}===]> A.B.C.C.

Bear Kodiak & K. Hunter, D. Palmer Hunter, Ben Pearson Hunter, Wing Presentation II & 4 Red Wing Hunters (LH & 3 RH), Browning Explorer, Cobra II & Wasp, Martin/Howatt Dream Catcher, Root Warrior, Shakespeare Necedah.

Offline bartcanoe

  • Trad Bowhunter
  • **
  • Posts: 303
Re: Spine tolerant
« Reply #4 on: March 14, 2014, 06:34:00 AM »
Quote
Originally posted by Stumpkiller:
With a centershot recurve you can get away with a wide spine range - especially overspined.
That's what surprised me, the Echo is a straight limbed, not centershot longbow.

I'll have to try broadheads like gringol suggested.
Dave

US Army Retired (1984-2013)
Job 42:1-6

Offline bigbadjon

  • Trad Bowhunter
  • **
  • Posts: 1472
Re: Spine tolerant
« Reply #5 on: March 14, 2014, 08:13:00 AM »
Your bow will only have one dynamic spine that flies well no matter how much centershot a bow has. Fletched arrows won't mask a poor match as you get better.
Hoyt Tiburon 55#@28 64in
A&H ACS CX 61#@28in 68in (rip 8/3/14)

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8260
  • Contributing Member
Re: Spine tolerant
« Reply #6 on: March 14, 2014, 10:39:00 PM »
True, there is only one theoretically optimal spine for a given bow/arrow combination, but few of us have form good enough to find it.  

Luckily, most bows will shoot a range of spines WELL, particularly overspined arrows, as Stumpkiller notes.  For example, I can vary the spine of my arrows by 15# on my ACS bows, and get arrow flight that's perfect to the naked eye and hit what I'm shooting at.  That's good enough for me.

Take a look at the "Old School" tuning thread for lots more examples.  I've been shooting sticks for more than 50 years and have seldom had a problem getting extremely good arrow flight, and I'm sure some my arrows weren't perfectly matched to the bow. I'm not nocking the latest spine calculator/formula. I think it's an excellent tool, but we managed to get good arrow flight long before that tool was developed.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©