3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Recurve tuning questions.  (Read 678 times)

Offline dans89

  • Trad Bowhunter
  • **
  • Posts: 23
Recurve tuning questions.
« on: March 23, 2014, 11:44:00 AM »
I just bought my first recurve this week. Its a Samick Sage with 60# limbs. I've been trying to tune via adjusting brace height and can't seem to find the "sweet spot". I started at the lower end of the recommended BH and worked my way up to the higher end 3 twists at a time, but no matter what the string still seems to "twang" rather than have a "thump" sound to it. Anyone have any advise for a newbie?

Offline Caughtandhobble

  • Trad Bowhunter
  • **
  • Posts: 1661
Re: Recurve tuning questions.
« Reply #1 on: March 23, 2014, 11:48:00 AM »
I have no experience with the Sage bows, but I have heard many folks say they are great bows as soon as you replace the factory string with a good Flemish twist string. Good Luck!!!

Offline jrbows

  • Trad Bowhunter
  • **
  • Posts: 335
Re: Recurve tuning questions.
« Reply #2 on: March 23, 2014, 11:49:00 AM »
Do you have string silencers on?
SAVE A STUMP SHOOT A DEER

Offline dans89

  • Trad Bowhunter
  • **
  • Posts: 23
Re: Recurve tuning questions.
« Reply #3 on: March 23, 2014, 11:51:00 AM »
No string silencers. I do have some B-50 that I could make a Flemish twist string out of.

Offline Chris Steele

  • Trad Bowhunter
  • **
  • Posts: 38
Re: Recurve tuning questions.
« Reply #4 on: March 23, 2014, 12:00:00 PM »
I wrapped yarn around both ends of the string,where it hits the limb tips and put puff ball silencers on it,now it's just a thump.
Chris Steele

Offline damascusdave

  • Trad Bowhunter
  • **
  • Posts: 3273
Re: Recurve tuning questions.
« Reply #5 on: March 23, 2014, 12:15:00 PM »
What weight arrows are you shooting?

DDave
I set out a while ago to reduce my herd of 40 bows...And I am finally down to 42

Offline dans89

  • Trad Bowhunter
  • **
  • Posts: 23
Re: Recurve tuning questions.
« Reply #6 on: March 23, 2014, 12:23:00 PM »
Right now I'm shooting some 2117 Easton aluminum arrows until my order for fetching comes in, then I'll be shooting some .400 Easton axis traditional arrows.

Offline damascusdave

  • Trad Bowhunter
  • **
  • Posts: 3273
Re: Recurve tuning questions.
« Reply #7 on: March 23, 2014, 12:36:00 PM »
I was thinking a very light arrow might be contributing to the noise...2117 should be plenty heavy...maybe try the different string idea...you want the bow as quiet as possible before adding string silencers...I have one recurve that is much quieter since I went to a different string

DDave
I set out a while ago to reduce my herd of 40 bows...And I am finally down to 42

Offline Coach Jones

  • Trad Bowhunter
  • **
  • Posts: 254
Re: Recurve tuning questions.
« Reply #8 on: March 23, 2014, 12:37:00 PM »
60 pounds is a lot of weight to start with a recurve.

Offline dans89

  • Trad Bowhunter
  • **
  • Posts: 23
Re: Recurve tuning questions.
« Reply #9 on: March 23, 2014, 12:37:00 PM »
I'll make a Flemish twist string for it today and see if that makes a difference. Thanks for the input.

Offline moebow

  • Trad Bowhunter
  • **
  • Posts: 2509
Re: Recurve tuning questions.
« Reply #10 on: March 23, 2014, 12:45:00 PM »
"I just bought my first recurve this week. Its a Samick Sage with 60# limbs."

JUST SHOOT for a while!!  60# is a LOT to start with but your arrows (2117) for that bow will be fine for now.  Set your brace height in the middle of the recommended range and forget it.

With trad shooting, your tune will DEFINITELY change as you learn to shoot and the "noise" you are experiencing will probably change too.  So save money and frustration and JUST SHOOT what you have.  In a month or so you can re-visit the issue.  This is the polar opposite of compound shooting -- where your traditional "tune" is 90% YOU and 10% equipment.  With C bows it is 90% equipment and 10% you.

One week just doesn't "cut it" for being stable enough to "tune" effectively.

Arne
11 H Hill bows
3 David Miller bows
4 James Berry bows
USA Archery, Level 4 NTS Coach

Are you willing to give up what you are; to become what you could be?

Offline nampook93

  • Trad Bowhunter
  • **
  • Posts: 40
Re: Recurve tuning questions.
« Reply #11 on: March 23, 2014, 02:02:00 PM »
now im am not an expert of any kind. but my first bow was a recurve, and I found that a good bear fur or leather arrow shelf helps along with beaver fur string silencers as well. best of luck.

Online Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8274
  • Contributing Member
Re: Recurve tuning questions.
« Reply #12 on: March 23, 2014, 02:34:00 PM »
I agree with Moe  All strings make noise.  However, a string will always make less noise with string silencers than without string silencers.

Offline dans89

  • Trad Bowhunter
  • **
  • Posts: 23
Re: Recurve tuning questions.
« Reply #13 on: March 23, 2014, 03:04:00 PM »
Thanks for the input.

Offline tradhunterRN

  • Trad Bowhunter
  • **
  • Posts: 97
Re: Recurve tuning questions.
« Reply #14 on: March 23, 2014, 04:08:00 PM »
I am with moebow. Alot of the noise could be technique related, especially with it being your first recurve and a new bow in general. Even an issue with your release could be causing louder than normal string twang

Additionally, I shoot a Samick Sage with 50# limbs and love it; for the record though I have not owned another trad bow to compare it to

  • Guest
Re: Recurve tuning questions.
« Reply #15 on: March 23, 2014, 06:37:00 PM »
If you are used to shooting longbows, a recurve will always sound like a TWANG! That longbow THUD is a waaaaaaay better sound to me.

I also totally agree with what Moebow said in his post above!

Bisch

Offline old_goat2

  • Trad Bowhunter
  • **
  • Posts: 2387
Re: Recurve tuning questions.
« Reply #16 on: March 23, 2014, 09:35:00 PM »
Sage is a great bow for the money, what I recommend to everyone that is buying one is shell out another 15 bucks and get a decent string for it, the one that comes with it is JUNK! Put some string silencers on her and it will be better. Where at in CO are you?
David Achatz
CPO USN Ret.
Various bows, but if you see me shooting, it's probably a Toelke in my hand!

Offline reddogge

  • Trad Bowhunter
  • **
  • Posts: 4926
Re: Recurve tuning questions.
« Reply #17 on: March 23, 2014, 09:41:00 PM »
Quote
Originally posted by old_goat2:
Sage is a great bow for the money, what I recommend to everyone that is buying one is shell out another 15 bucks and get a decent string for it, the one that comes with it is JUNK! Put some string silencers on her and it will be better. Where at in CO are you?
X2. The string the Sage comes with is garbage.
Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

Offline dans89

  • Trad Bowhunter
  • **
  • Posts: 23
Re: Recurve tuning questions.
« Reply #18 on: March 24, 2014, 09:20:00 AM »
A lot of really good info here. Thanks a bunch guys. I'll just keep shooting it and working on my technique. @ old_goat2, I'm in Montrose, down by Grand Junction. I'll probably be moving to your end of the state a little later this year though.

Offline Steelman

  • Trad Bowhunter
  • **
  • Posts: 56
Re: Recurve tuning questions.
« Reply #19 on: March 24, 2014, 09:26:00 AM »
I have the same bow, I've had for a long time. I agree with everyone you should change the string put some string silencers on. Set the brace in the middle of the range and shoot the thing a lot. As Moe stated over time your form will get better and then you can work on tuning the bow a little better. After having the bow for years and having different, higher price bows, I still shot the sage from time to time.

Users currently browsing this topic:

0 Members and 2 Guests are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©