3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Blacktail bows brace height  (Read 836 times)

Offline tnhornhter1099

  • Trad Bowhunter
  • **
  • Posts: 64
Blacktail bows brace height
« on: May 30, 2014, 08:26:00 AM »
What brace height produces the best results on your Blacktails?  7, 7 1/8, 7 1/2, I can't really tell any differnece
2-black widows 45# & 43# @28
leon stewart LB 50# @28
predator 47# @28
blacktail snakebit 45#@28

Offline Paul Shirek

  • Trad Bowhunter
  • **
  • Posts: 183
Re: Blacktail bows brace height
« Reply #1 on: May 30, 2014, 08:51:00 AM »
I have owned multiple Blacktails. It will depend on which bow you have. For 64 in takedowns, I did really well with 7 1/2. For the 66 in takedown I needed 7 3/4. I now have a new Sitka 62 in and like just barely under 7 1/2. The difference I could tell was noise and vibration when I went too low and also a bit finicky with accuracy when too low.  I don't like too high at all because I like the efficiency that comes when it's just right. Have fun!

Offline tnhornhter1099

  • Trad Bowhunter
  • **
  • Posts: 64
Re: Blacktail bows brace height
« Reply #2 on: May 30, 2014, 11:45:00 AM »
the bow I have is a 62" Snakebit 45#@28
2-black widows 45# & 43# @28
leon stewart LB 50# @28
predator 47# @28
blacktail snakebit 45#@28

Offline cyred4d

  • Trad Bowhunter
  • **
  • Posts: 465
Re: Blacktail bows brace height
« Reply #3 on: May 30, 2014, 01:07:00 PM »
My 62 inch blacktail likes 7 1/2.

Offline BrownA5

  • Trad Bowhunter
  • **
  • Posts: 1273
Re: Blacktail bows brace height
« Reply #4 on: May 30, 2014, 01:09:00 PM »
I had a 60" and 62" Blacktail and both liked
7 1/4" for brace height

Online elkken

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3922
Re: Blacktail bows brace height
« Reply #5 on: May 30, 2014, 01:22:00 PM »
My 62" BT is set at 7 1/2" ... took me a bit of work to get this bow quiet
Sometimes it's better to be lucky than good

TGMM Family of the Bow

Offline tnhornhter1099

  • Trad Bowhunter
  • **
  • Posts: 64
Re: Blacktail bows brace height
« Reply #6 on: May 30, 2014, 04:04:00 PM »
thanks guys, I am set at 7 1/4 right . 7 1/2 seemed a bit extreme to me but I will play with it a bit and see if it makes a difference in how quiet it is, thanks again
2-black widows 45# & 43# @28
leon stewart LB 50# @28
predator 47# @28
blacktail snakebit 45#@28

Online Steelhead

  • Trad Bowhunter
  • **
  • Posts: 2545
Re: Blacktail bows brace height
« Reply #7 on: May 30, 2014, 09:32:00 PM »
7.5 is good

I would buy a 10 strand D-10 string or a Rhino 12 strand with built up loops and put good sized wool puffs on that string.Your bow will shoot quietly

I have had quite a few Blacktails and like a custom string on all of them over the stock strings that come with the bow.It will be quieter,more pleasant to shoot and a little bit faster

Offline tnhornhter1099

  • Trad Bowhunter
  • **
  • Posts: 64
Re: Blacktail bows brace height
« Reply #8 on: May 31, 2014, 10:55:00 AM »
I have an 8 strand BCY D-10  SBD string with 2 yarn balls as string silencers and padded loops, is 7 1/2 still ok with this 8 strand string?
2-black widows 45# & 43# @28
leon stewart LB 50# @28
predator 47# @28
blacktail snakebit 45#@28

Online elkken

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3922
Re: Blacktail bows brace height
« Reply #9 on: May 31, 2014, 12:04:00 PM »
Should be just fine, I put a piece of felt/light fleece material over the string groves on both limb tips. You could also wrap below the loops with yarn instead of material over the sting groves. I know a few folks that have gone as low as 6 strands with padded loops on their BT's. My current string is ultra cam and made by Allen Schafer ... Lefties R Us   great strings
Sometimes it's better to be lucky than good

TGMM Family of the Bow

Offline Ryman Cat

  • Trad Bowhunter
  • **
  • Posts: 232
Re: Blacktail bows brace height
« Reply #10 on: May 31, 2014, 03:01:00 PM »
7 1/4 is where all mine liked as well no more tham 7.5 though for me from 9 blackies.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©