What size feathers does everyone use?

[2bird]

Been shooting 2 1/2 - 3" but am going to switch to 4"

[Timbuck2]

5" shield.

[thump]

5 1/2" shield cuts on my wooden arrows also.

[Biathlonman]

4" parabolic for carbon, 5" parabolic for wood

[DaveT1963]

three 5 inch LW shield cut

[Hoyt]

Three 3" Magnus Shields.

[randy grider]

3 4" shield cuts. With properly spined/tuned arrows, it doesn't take much. They are quiet, and fast

[Mud_Slide_Slim]

4x4" and sometimes 4x3"...all parabolic on carbons.

[yeager]

I use 5" parabolic.  Have used shield and banana cuts in the past, but always gravitate back to parabolic.

[elknutz]

4X4" para usually, like the look of shield a little better.

[bogeyrider63]

3x5" parabolic.

[Bjorn]

3 5" shields that I chop a little lower than a production feather.

[Terry Green]

5 mostly...sometimes 5.5

[DennyK]

3-5" shields.

[JamesKerr]

3 x 4" or 4 x 4" for me.

[Sharp Stick]

I say put as much feather on as you can.  I use 5" Parabolic

[hitman]

I use 5 inch feathers on my woodies.

[Jerry Jeffer]

4x3" low profile naners, or 4x2" high profile naners.

[sunshine]

for summer fun and smaller broadheads (stingers, regular silver flames, helix) I like 4x3". bigger heads 4x4" for sure. this spring I started playing with a 3D setup and found that with a well tuned 2016 a 2x3" fell very well and did not drop off after 25 yds as bad as other fletches. but that is only for target fun. I like trying different things.

[Stickbow]

Always been 5 inch para or shield. Recently I bought a low banana chopper. 30" 340's w/220 upfront are driving so nice bareshat I am going to try and lessen my profile................we will see.