Author Topic: Instinct 3 blade (Read 1365 times)

Kevin Dill · « **Reply #20 on:** July 11, 2014, 06:18:00 AM »

Bill set me up with the Grizzly Instinct heads for a trip I just completed. I was on the island of Molokai and hunted axis deer for ten days. I probably had 50 deer at ranges under 30 yards, but never pulled the string. I can't say how the Instinct performs on big game, but I can tell you that these are completely premium broadheads. No shortcuts...no burrs...nothing but near-perfect steel and wicked killing power. They look like you could drop one accidentally and penetrate your foot completely.

el chupa nibre · « **Reply #21 on:** July 11, 2014, 05:53:00 PM »

Is the ferrule width going to remain the same for the 175gr heads?

Jason Kendall · « **Reply #22 on:** July 11, 2014, 06:08:00 PM »

Love it! Really looking forward to the 175's for this fall.

Blaino · « **Reply #23 on:** July 11, 2014, 09:48:00 PM »

I'm confused. I thought they came in at 190.... Is that with the screw-in adapaterare or are they 200 glue-on?

I want some new woodies with the Instinct on the killing end. Hunting season is getting close and I'm starting to get the itch!

legends1 · « **Reply #24 on:** July 12, 2014, 02:15:00 AM »

Very nice looking 3 blade. If I was a 3 blade guy I would be all over those. I love my Grizzly 2 blades. Great job!

zipper bowss · « **Reply #25 on:** July 12, 2014, 05:27:00 AM »

Quote

Originally posted by el chupa nibre:
Is the ferrule width going to remain the same for the 175gr heads?

The farrel on the 175 is 11/32" in stead of 23/64". That is one way we can drop weight off of the 200's and still use the same dies for both heads.

Blano the small run of 375 heads did average just about 190 but there were several I had to scrap because of voids in the braze.

Brock · « **Reply #26 on:** July 12, 2014, 08:49:00 AM »

Guess will weigh mine before I sharpen them to see what they weigh.... Got them sitting on my shelf ready to be mounted to some arrows.

Zbone · « **Reply #27 on:** July 12, 2014, 09:10:00 AM »

Are they double bevel or single bevel only? Would be interested in double bevel so to sharpen them on a grinder like Snuffers...

Hermon · « **Reply #28 on:** July 12, 2014, 09:23:00 AM »

Somebody makes a single bevel 3 blade?

Mike Gerardi · « **Reply #29 on:** July 12, 2014, 09:34:00 AM »

They are not single bevel.

Shinken · « **Reply #30 on:** July 12, 2014, 09:38:00 AM »

Red Feather Archery in Oregon makes both a glue on single bevel 3-blade and a one-piece screw-in single bevel 3-blade.

I have shot both - into foam only - and the construction is excellent.

Keep the wind in your face!

Shoot straight, Shinken

Mike Gerardi · « **Reply #31 on:** July 12, 2014, 09:48:00 AM »

Quote

Originally posted by KentuckyTJ:
[QB] Sorry getting a little short on patients in my old age.

I know the feeling. you not alone.

Zbone · « **Reply #32 on:** July 12, 2014, 10:06:00 AM »

Oh, sorry my bad, was on the wrong page of their website... Was on their two blade Grizzly page...

Carry on...

Mike Gerardi · « **Reply #33 on:** July 12, 2014, 10:12:00 AM »

Zbone, the instinct heads are a breeze to sharpen.

Tajue17 · « **Reply #34 on:** July 12, 2014, 10:26:00 AM »

can you imagine the hole from a single bevel 3-blade,,,,, sharpening would be a hassle I think though.

zipper bowss · « **Reply #35 on:** July 12, 2014, 11:09:00 AM »

Quote

Originally posted by Tajue17:
can you imagine the hole from a single bevel 3-blade,,,,, sharpening would be a hassle I think though.

HUMMM...I think it would be counter productive. The 3 single bevels would be trying to twist when going through tissue but the 3 blades sticking up would make it very difficult for the head to turn. Because there are 3 separate blades sticking up. The head would be trying to move a lot of tissue to actually twist.Just my best guess though. I dont have any actual experience with a single bevel 3 blade.
Bill

legends1 · « **Reply #36 on:** July 12, 2014, 11:18:00 AM »

My thought on a single bevel 3 blade would be it would be tough to sharpen. If you can't sharpen the blades super sharp then it wouldn't help penetration.

jonsimoneau · « **Reply #37 on:** July 12, 2014, 05:00:00 PM »

Looks great Bill. I love the needle tip that looks to be very strong. Safe to say you will get no, or very little tip curl shooting through deer sized critters?

varmint101 · « **Reply #38 on:** July 12, 2014, 08:56:00 PM »

Nope, not a problem to sharpen the RFA heads. Quality steel and could get them sharp quickly. No experience on critters, but they would turn like a single bevel two blade in a target.

Bill, I have to say those heads look mean! I have no money, but I'm still going to try and get a few before deer season!

ShadeMt · « **Reply #39 on:** July 13, 2014, 09:00:00 PM »

Are the 175 grain heads the weight as a glue on or with an insert installed?


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Instinct 3 blade (Read 1365 times)

Users currently browsing this topic: