3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Recommended arrow weight  (Read 343 times)

Offline doubletap

  • Trad Bowhunter
  • **
  • Posts: 6
Recommended arrow weight
« on: September 24, 2007, 09:35:00 PM »
As I said in an earlier post my bow is rated 45# @ 28". I'm pulling about 29.5" so let's say I'm shooting about 48#. I currently have Easton Axis ST 500 arrows which are 30" long. At 8.1 gr/in the bare shafts calculate to 243 grains. Add in the HIT insert at 16 grains and a 125 grain broadhead and I'm sitting at 384 grains total.

I'm reading on this site where many of you are shooting 500, 600 even 700 grains.

Am I way under my optimum weight for this bow?

Should I look at aluminum shafts with weight tubes instead of carbon?

Offline Larry247

  • Trad Bowhunter
  • **
  • Posts: 518
Re: Recommended arrow weight
« Reply #1 on: September 24, 2007, 09:42:00 PM »
Shoot for 425gr and you should be o.k.
A trophy is in the eye of the beholder.

Offline 30coupe

  • Trad Bowhunter
  • **
  • Posts: 3114
Re: Recommended arrow weight
« Reply #2 on: September 24, 2007, 09:46:00 PM »
You can put weight tubes in carbon arrows. I like to have closer to 10 gr. per pound of bow draw weight, so yes, you are a bit light. More weight will give better penetration and a quieter bow. You could also try adding brass inserts (50 to 100 grains). The 100 grain insert would get you to 10 gr/pound. It also puts the weight forward, which is recommended by Dr. Ashby.

Personally, I have trouble getting decent arrow flight with carbons. My preference would be cedar, aluminum and carbon, in that order. Actually there may be other woods that would beat out the aluminum and carbon arrows, but I haven't tried anything else. Cedar works for me.
Kanati 58" 44# @ 28" Green glass on a green riser
Bear Kodiak Magnum 52" 45# @ 28"
Bodnik Slick Stick longbow 58" 40# @ 28"
Bodnik Kiowa 52" 45# @ 28"
Kanati 58" 46# @ 28" R.I.P (2007-2015)
Self-made Silk backed Hickory Board bow 67" 49# @ 28"
Bear Black Bear 60" 45# @28"
NRA Life Member

Offline ishiwannabe

  • Trad Bowhunter
  • **
  • Posts: 4360
Re: Recommended arrow weight
« Reply #3 on: September 24, 2007, 10:28:00 PM »
8-10 grains per pound is usually the norm, from what I have read here. Brass inserts, weight tubes, or changing your BH's could all put you in that range easily.
"I lost arrows and didnt even shoot at a rabbit" Charlie after the Island of Trees.
                         -Jamie

Offline Onestringer

  • SPONSOR
  • Trad Bowhunter
  • *****
  • Posts: 827
Re: Recommended arrow weight
« Reply #4 on: September 25, 2007, 12:01:00 AM »
Hey Double, I shoot the exact same thing as you, 45lb and pulling 29,5".  The calculations listed my manufactors never work out for some reason.  I also shoot some Easton Axis 500, but I keep them full lenght which are 31" long.  

Easton Axis 500 full lenght 31" with 125 grain head, with 9" wrap and 3 5" feathers weigh 432 grains

I also have some Beman MFX Black Max 500 same set up as above 454 grains

I also have some Beman MFX Classic 500 same set up as the first at 481 grains.

In your case subtract the inch you cut off. I think you are fine as long as they are flying for you.  

scott
Sights, SIGHTS, we don't need no stinkin sights!!!!!

If Geronimo shot a Black Widow, you would be speaking Apache.

TGMM Family of the Bow

             http://www.onestringer.com

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©