3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Adding a light color to the front end of the shaft during low light  (Read 525 times)

Offline Tedd

  • Trad Bowhunter
  • **
  • Posts: 1614
I don't want to debate shooting/sighting methods at all. Apparently I see some of the arrow shaft in my lower vision and use it as a guide. Though I don't really know I do it or think about it.
Anyhow, during low light sometimes my groups open way up. The black or dark wood grain carbons are pretty much invisible at that shooting moment.
Anyone aver add a little light color to the front end? Unstained wood would be about the right color.
Tedd

Offline Bob B.

  • Trad Bowhunter
  • **
  • Posts: 1453
Re: Adding a light color to the front end of the shaft during low light
« Reply #1 on: August 13, 2014, 07:32:00 AM »
I like shooting white crown dipped arrows with 3white Fletches, or fluorescent green dip with fluorescent green Fletches ... It really helps me follow my flight to the target, especially in low light.  I love those two colors for hunting as well.

Bob
66"  Osage Royale    57lbs@29
68"  Shrew Hill      49lbs@29
68"  Deathwish       51lbs@29
68"  Morning Star    55lbs@29
68"  Misty Dawn      55lbs@29

Offline reddogge

  • Trad Bowhunter
  • **
  • Posts: 4926
Re: Adding a light color to the front end of the shaft during low light
« Reply #2 on: August 13, 2014, 08:25:00 AM »
You could try it. Try either paint or a small portion of a wrap.
Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

Offline Orion

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 8252
  • Contributing Member
Re: Adding a light color to the front end of the shaft during low light
« Reply #3 on: August 13, 2014, 09:20:00 AM »
Could wrap a piece of white fluorescent tape behind the head, or paint a white ring there. Saw some point of aim shooters do that back in the day. Well not the fluorescent tape.  It hadn't been invented yet.

Offline kat

  • Trad Bowhunter
  • **
  • Posts: 1413
Re: Adding a light color to the front end of the shaft during low light
« Reply #4 on: August 13, 2014, 09:37:00 AM »
Yes. I have painted the last inch under the broad head white. It did help me.
Ken Thornhill

Online tippit

  • TG HALL OF FAME
  • Trad Bowhunter
  • *****
  • Posts: 6239
Re: Adding a light color to the front end of the shaft during low light
« Reply #5 on: August 13, 2014, 09:49:00 AM »
I paint my entire shaft white.  As it gets darker (also depending how deep in over growth you are) the end of the shaft gets harder to see.  For me, this gives me a better sight picture for the last 15 minutes.  Been doing it for years...tippit
TGMM Family of the Bow
VP of Consumption MK,LLC

Offline Tedd

  • Trad Bowhunter
  • **
  • Posts: 1614
Re: Adding a light color to the front end of the shaft during low light
« Reply #6 on: August 13, 2014, 10:10:00 AM »
Tippit,
Yes, its those last 15 minutes or the first 15 minutes. Eyes are a bit older I guess. I really noticed it this morning before work. I missed badly on the first shot. In a few minutes it got a bit lighter and groups tightened right up.
Do you have any photos of the all white?
Tedd

Online M60gunner

  • Contributing Member
  • Trad Bowhunter
  • ****
  • Posts: 3014
Re: Adding a light color to the front end of the shaft during low light
« Reply #7 on: August 13, 2014, 10:24:00 AM »
Watching one of the trad dvd's I recall one of the archers saying he sprayed his entire shaft. Easier for him as he used shaft to " sight".

Offline 2bird

  • Trad Bowhunter
  • **
  • Posts: 389
Re: Adding a light color to the front end of the shaft during low light
« Reply #8 on: August 13, 2014, 10:30:00 AM »
Some guys put powder on their point to help them stand out more. You could try that before you paint, or just try a small bit of masking tape.
Vegetarians are cool, I eat them with every meal!

Offline jonsimoneau

  • Trad Bowhunter
  • **
  • Posts: 2946
Re: Adding a light color to the front end of the shaft during low light
« Reply #9 on: August 13, 2014, 10:45:00 AM »
Roger Rothhaar paints his whole arrow shaft platnum primer grey for this same reason.  This made good sense to me so I did the same thing a few days ago.  Have not tried shooting them yet though.

Offline reddogge

  • Trad Bowhunter
  • **
  • Posts: 4926
Re: Adding a light color to the front end of the shaft during low light
« Reply #10 on: August 13, 2014, 05:15:00 PM »
Maybe take a page from us old M/L guys and paint the back edge of your bh facing you white. We used to do that with iron sights. That little bit of white at dusk shines like new money.
Traditional Bowhunters of Maryland
Heart of Maryland Bowhunters
NRA
Mayberry Archers

Offline bamboo

  • Trad Bowhunter
  • **
  • Posts: 1161
Re: Adding a light color to the front end of the shaft during low light
« Reply #11 on: August 13, 2014, 06:28:00 PM »
if you paint[white krylon]  2-3" of the shaft right behind the broadhead it appears as a 3/4" high post below your sight picture--good in all light conditions-real good in low light!!
Mike

Offline mountain lion

  • Trad Bowhunter
  • **
  • Posts: 325
Re: Adding a light color to the front end of the shaft during low light
« Reply #12 on: August 13, 2014, 07:07:00 PM »
In the masters of the bare bow DVD, Denny Sturgis said he wraps a piece of white electrical tape righ behind the point, it helps him with the same thing.
Wild Horse Creek  kestrel 60" 56#@28
Black Widow KB X 58" 51@28"
Black Widow PSA lll 60" 52@28"

" Do not go where the path may lead, go instead where there is no path and leave a trail " Ralph Waldo Emerson

Offline TxAg

  • Trad Bowhunter
  • **
  • Posts: 2910
Re: Adding a light color to the front end of the shaft during low light
« Reply #13 on: August 13, 2014, 07:37:00 PM »
You could try white reflective tape. It would help you find lost arrows. I always use it on the nock end, but Couldn't hurt to use it on the other end also.

Offline ThePushArchery

  • Tradbowhunter
  • Trad Bowhunter
  • *
  • Posts: 976
Re: Adding a light color to the front end of the shaft during low light
« Reply #14 on: August 13, 2014, 08:20:00 PM »
White electrical tape x2.

I also in the past have laid an arrow on the table with the broadhead on the shaft so I knew exactly which "hemisphere" of the shaft would be pointing toward the sky when in the treestand.

One swipe of white krylon spray paint on my number 1 arrow allowed me to have a bright white runway down my arrow for low light shooting, but it would be facing toward the sky when in a treestand while waiting for a shot in a tense situation.

Offline Tedd

  • Trad Bowhunter
  • **
  • Posts: 1614
Re: Adding a light color to the front end of the shaft during low light
« Reply #15 on: August 13, 2014, 09:27:00 PM »
I had a fresh can of Rustoleum X2 in gloss white that is for cap painting. That stuff is great paint. One quick coat really covers.
I sprayed the front 3" of shaft. Took my daughter to a basketball workout that is a 3 hour round trip. It was just getting dark when I got back. I shot a few with the white front arrow and I think I like it! I was too rushed to shoot more so I'll test more later.
I just painted one full length white…just to see how it is. looks different!
Tedd

Offline Tall Paul

  • Trad Bowhunter
  • **
  • Posts: 545
Re: Adding a light color to the front end of the shaft during low light
« Reply #16 on: August 13, 2014, 09:36:00 PM »
Quote
Originally posted by jonsimoneau:
Roger Rothhaar paints his whole arrow shaft platnum primer grey for this same reason.  This made good sense to me so I did the same thing a few days ago.  Have not tried shooting them yet though.
I just came in from shooting, right at dark, and was thinking about the same thing that RR said.

Jon-let us know how it works for you!
Is a life of rice cakes really life, or just passing time?-Rick Bragg

Offline jonsimoneau

  • Trad Bowhunter
  • **
  • Posts: 2946
Re: Adding a light color to the front end of the shaft during low light
« Reply #17 on: August 13, 2014, 11:09:00 PM »
Will do Paul.  Gotta get them fletched up tomorrow.

Offline Todd Cook

  • Trad Bowhunter
  • **
  • Posts: 419
Re: Adding a light color to the front end of the shaft during low light
« Reply #18 on: August 15, 2014, 07:42:00 AM »
If youre going to wrap something on the front try the white reflective tape. You can find it at auto parts stores. I don't put it up front, but always put a wrap of it in front of my feathers, as cresting. You'll be amazed how easy it is to find them after dark with a flashlight. Also, usually the blood starts real close to where the arrow is.

Offline Thumper Dunker

  • Trad Bowhunter
  • **
  • Posts: 3960
Re: Adding a light color to the front end of the shaft during low light
« Reply #19 on: August 16, 2014, 12:31:00 AM »
I paint the whole arrow bright got tiered of hunting for them.
You can hop but you can't hide.
If it was not for rabbits I would never get a buck.
Yip yipahooooo yipyipyip.

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©