3Rivers Archery



The Trad Gang Digital Market













Contribute to Trad Gang and Access the Classifieds!

Become a Trad Gang Sponsor!

Traditional Archery for Bowhunters






LEFT HAND BOWS CLASSIFIEDS TRAD GANG CLASSIFIEDS ACCESS RIGHT HAND BOWS CLASSIFIEDS


Author Topic: Brace height on Bear Kodiak Magnum  (Read 1640 times)

Offline Hoser1268

  • Trad Bowhunter
  • **
  • Posts: 185
Brace height on Bear Kodiak Magnum
« on: September 27, 2007, 11:06:00 PM »
Hi guys,

Would anyone out there know the brace height of an older 52" Kodiak Magnum? I picked one up and put a 48" string and without twists the brace height was about 9".  That seems a little high to me. Any help would be appreciated.

Rob...
54" Morrison Cheyenne Longbow 42@26
54" Morrison Cheyenne Recurve 46@26
54" Rocky Mt. Recurve  52@28
50" Sierra Blanca Recurve 44@26
52" Sierra Blanca Recurve 50@26

Offline ckruse

  • Trad Bowhunter
  • **
  • Posts: 728
Re: Brace height on Bear Kodiak Magnum
« Reply #1 on: September 27, 2007, 11:30:00 PM »
Closer to 8" seems to work best, give or take 1/4". Some like them higher, but right about 8" seems good to me. CKruse
"The lack of machinery puts you closer to the act- an act that is ethical, good, right, and correct."- CKruse

Offline VA Bowbender

  • Trad Bowhunter
  • **
  • Posts: 629
Re: Brace height on Bear Kodiak Magnum
« Reply #2 on: September 28, 2007, 07:30:00 AM »
7 3/4" to 8" would be about right.
Bows, Broadheads & Backstraps

Offline Shawn Leonard

  • Trad Bowhunter
  • **
  • Posts: 7837
Re: Brace height on Bear Kodiak Magnum
« Reply #3 on: September 28, 2007, 12:43:00 PM »
Yup, I would agree 8"s is about right, give or take a tad. That 48" string is probably right too, as it will stretch about an 1" if it is B-50, as it should be. Shawn
Shawn

Users currently browsing this topic:

0 Members and 1 Guest are viewing this topic.
 

Contact Us | Trad Gang.com © | User Agreement

Copyright 2003 thru 2024 ~ Trad Gang.com ©