Author Topic: Dryad ACS LBX ready for prime time (Read 1310 times)

britt · « **Reply #20 on:** January 09, 2015, 03:24:00 PM »

Mike, will you be bring a lefty to High Country Shoot?

wingnut · « **Reply #21 on:** January 09, 2015, 03:37:00 PM »

We should have a full compliment of bows with us at the High Country Shoot this year.

Mike

**DONOTDELETE** · « **Reply #22 on:** January 09, 2015, 07:34:00 PM »

Quote

Originally posted by John Havard:
Kirk, they were in the range of 45#

Those are pretty decent numbers from a 45# bow @ 28" draw John. Congrats brutha.

I've always got my best numbers from 51-53# or higher draw weights.

John Havard · « **Reply #23 on:** January 09, 2015, 09:36:00 PM »

Kirk, thanks for the kind words.

9 grains per pound has always tested the same for me in draw weight ranges from 35# to 70#. I've never seen any difference in AMO arrow speeds as long as the grains per pound were precisely the same.

screamin · « **Reply #24 on:** January 10, 2015, 01:37:00 AM »

You guys ever let guys take a test drive? would love to fondle a riser before I took the plunge into the abyss.

katman · « **Reply #25 on:** January 10, 2015, 08:19:00 AM »

Any comments on the noise level with this new limb? I have had the 4G and have the CG model and can get them hunting quiet easily.

Recommended brace with your ILF and the trad tech pictured riser is the same tested? If so the increased vertical stability at lower brace is most welcome.

Any DFC available?

Recommended limb length on a 17" DAS 29" draw?

Thanks.

wingnut · « **Reply #26 on:** January 10, 2015, 08:43:00 AM »

Katman,

Yep John set the limbs up in the middle of the recommended brace on each riser.

For the 17" DAS and 29" I'd go with XL limbs.

Mike

katman · « **Reply #27 on:** January 10, 2015, 09:16:00 AM »

Thanks Mike, need to save for these.

Sixby · « **Reply #28 on:** January 10, 2015, 04:56:00 PM »

Congratulations guys. You are doing a great job.
God bless, Steve

Sixby · « **Reply #29 on:** January 10, 2015, 04:56:00 PM »

Congratulations guys. You are doing a great job.
God bless, Steve

**DONOTDELETE** · « **Reply #30 on:** January 10, 2015, 10:00:00 PM »

Quote

Originally posted by John Havard:
Kirk, thanks for the kind words.

9 grains per pound has always tested the same for me in draw weight ranges from 35# to 70#. I've never seen any difference in AMO arrow speeds as long as the grains per pound were precisely the same.

Really? That's incredible John. I've always had problems getting the same speeds at lower draw weights even keeping a close eye on core to glass ratio.... The lower preload on the lighter weight limbs was my prime suspect...

Good on you bro...

Over&Under · « **Reply #31 on:** January 11, 2015, 09:47:00 AM »

Quote

Originally posted by wingnut:
This long limb mounted on a 15" riser endured 215,000 cycles drawn to 30". That's 3" beyond the recommended max draw on that 60" setup.
Mike
__________________

Mike

We're these 215,000 dry fires, actual shots, draw-let down?...and...did the limb fail at 215,000 or is that just where you stopped the test?

Thanks

wingnut · « **Reply #32 on:** January 11, 2015, 10:25:00 AM »

They are draw cycles. Draw to 30" and let down. The limbs were still perfect after the test and I sent them to John for his use this year.

Mike

Hud · « **Reply #33 on:** January 11, 2015, 11:09:00 AM »

What lengths are the bows, and risers shown in the 1st, & 5th picture?

wingnut · « **Reply #34 on:** January 11, 2015, 11:38:00 AM »

The first one is a 17" riser and the long limbs for a 62", the 5th is a 21" with longs for a 66" and the last one is a 19" with longs for a 64".

Mike

cloudbaseracer · « **Reply #35 on:** January 12, 2015, 09:27:00 AM »

How do these differ from the A&H ACS at the same weight and length?

John Havard · « **Reply #36 on:** January 12, 2015, 11:29:00 AM »

cloudbaseracer - pm sent.

old bucky · « **Reply #37 on:** January 12, 2015, 04:21:00 PM »

What limb length for 17" DAS and 26" draw.

Thanks Sam

screamin · « **Reply #38 on:** January 12, 2015, 04:49:00 PM »

I was wondering what limb length for a 28 1/4" draw using either a 15" or 13" riser?

wingnut · « **Reply #39 on:** January 12, 2015, 05:04:00 PM »

Sam,

Your shortest limb would be a Medium on the 17" riser.

Dan,

For your draw you would need and XL on the 15" and XXL on the 13". I wouldn't really recommend the 13" riser combo unless you have your heart set on that short of a riser.

MIke


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Dryad ACS LBX ready for prime time (Read 1310 times)

Users currently browsing this topic: