Your hog arrow setup lets see em'

[S.C. Hunter]

The arrow of choice, weight/length and broadhead.Bow weight and draw length for this setup.

[huskyarcher]

I am shooting a #40 Omega Imperial this year. Arras are CE Heritage 150s @30in, real sharp zwickey no mercy's adding up to be 175gr up front. Arras fly like darts and slide through them like hot butter. I wouldn't hesitate on anything in the lower 48 other than an elk or moose.

 

32" Gold Tip XT Hunter 55/75 black shaft, 100gr brass insert, 150gr German Kinetic broadhead, 3-4" Parabolic feathers. 530gr total arrow weight with 22%FOC.  

Bow is a Sarrels Blueridge takedown longbow, 50#@29.5"

Like huskyarcher, I would not be scared to use this setup for anything in NA, including the elk and moose!

Bisch

[dougbutt]

Going on my first hog hunt in April.  I'll be using full length gold tip 7595 blems with 300 grain vpa 2 blade broad heads up front. I'll be shooting my Sasquatch SS 57 lbs at 27 1/2, hopefully i get  a shot at big one to see what kind of penetration i can get.

[awbowman]

For now, I'd shoot the same arrow that I shoot out of my Super D:

29" GT 35/55 blem from Big Jim
50 grain brass insert
145 grain Eclipse BH with aluminum insert
3 - 4" parabolic feathers.

If I remember right it weighs in right at 500 grains and I think the FOC is right at 16%

I will be coming up with a heavier arrow for my Mag to hunt hogs though.  I'd like to end up with a woodie about 600-625 grains

[Dave Lay]

same as deer, 28" 610 gr easton 2020 and zwickey delta with bleeder..out of a 60" 60@28 widow PSA drawn to about 27 1/2 ,  just a great all round combo.. never had a issue on pigs or deer..

[LB_hntr]

Same arrow I use for everything.
27 inch goldtip with custom double brass insert 200 grain) 2 blade wide magnus head on steel 100 grain adaptor. 3 4" high back feathers.
Total arrow weight 705 grains with 31% efoc.

 Shot from a 57#@26" northern mist baraga longbow.

The arrows fly great hit hard and are very forgiving and stable.

What I like best is they go so slow that if I make a bad shot I can usually run and catch the arrow before it gets to the target!

[Fastltz]

Be my first trip this year...right now planning on 31.5 axis with 50 grain insert and 175 grain deltas...600 total out of a [email protected] ilf rig...may have my new limbs from kirk and have some easton acc shafts around so well see in the end.Hopefully I can get on a pig

[monterey]

Wish I needed a hog arrow!  :(

[Bjorn]

635 gn Doug Fir shaft 75/80 cut to 29 in. Abowyer Brown Bear BH.
 
These arrows are proven killers of hogs and elk.

[Todd Cook]

I like these pretty good. 65/70 shurwood, Magnus 1- 160 grain. This one was in better shape before this past Saturday evening.  [/IMG]

   [/IMG]

[Todd Cook]

 


maybe this will work.

[yeager]

I use Easton FMJ 500's tipped with the old Bear razorhead (greenies)for everything that I hunt.

[S.C. Hunter]

Thanks keep it coming

[Matty]

Originally posted by monterey:
Wish I needed a hog arrow!   :(  

Second that brother. But at the same time a lot of these fellas say I wish I needed an elk arrow.... I do envy you guys who can hunt year round hogs and deer. I sometimes wish I could just visit colorado a week or 2 a year to chase them and have the others for months at a time.

[Friend]

Bow…Dryad Orion.…60”…52@28…w/ACS RC limbs….same bow used in NZ last year

Arrow…Victory VForce HV300… 28 ¾”….100 gn insert….250 gn VPA Penetrator….Nocturnal…590 gn total

[Fletcher]

580 gr Surewood Fir and 200 gr Grizzly Kodiaks.  I also have some Grizzly Instincts and VPA 200 gr 3 blades mounted.  These are my deer arrows, too.

[cacciatore]

Bows vary from 57-63# arrows are CX Eritage 250 or 350 @29"depending on the bow,BH VPA 3 blade 250,Simmons Tree Shark 250 or Grizzly single bevel 250. My draw is 29".

[sticksnstones]

This is probably on the ridiculous side, but here is my setup for my 85# Northern Mist:
- Black Eagle Outlaw shaft from Simply Traditional in 300 spine.
- 300 grain Tuffhead from Vintage Archery.
- Custom one piece stainless steel adapter at 235 grains from a non-sponsor.
- 2 inches of footing.
- Every component secured with liberal JB Weld.
- 870 total grains at 37% FOC.
   

This is the arrow I zipped through my last pig in December:
     

Then I have this setup for my 64# Shrew:
- Black Eagle Outlaw 350 spine
- 125 grain one piece adapter from Ace (filled with JB Weld)
- Half the quiver is 200 grain Ace Super Express, other half is 200 grain new Grizzlys.
- more footing and JB weld.
- 660 total grains at 26% FOC.
     

Everything on the second arrow I got from Steve at Simply Traditional as he deals in all those brands. He's the one that got me hooked on these Outlaws, at $70 per full dozen they are better than some shafts that cost about double that.
Thom

[joe ashton]

54# 62" Pronghorn long bow
gold tip 35/55 shafts
4 4" yellow feathers
100gr brass inserts
125# woodsmans.