What is your arrow of choice?

[DesertDude]

GT 55/75 with 100 inserts 250gn heads 4x5"  

55 liberty contender

[stickem1]

31" Douglas Fir custom made by Snag.125g head, 75-80
31.5" Beman ICS Hunter 100g insert 200g head, 3X5"
620 grain
Fedora 560 1pc 61@30

[Kris]

"Please specify the bow and bow draw weight at your draw. Arrow spine and make as well as length, specs with regards to weight and inserts fletching wraps etc

- ACS 3 pc. TD

- 51#@28"

- 400 Beman MFX Classics

- AOL BOP 29.5"

- Alum insert, 75 grn. steel BH adaptor, any BH from 125 gns - 200 gns, one inch 2016 alum arrow outsert.

- 6" arrow wrap w/three 4" Parabolic True Flight fletches.

Kris

[Joeabowhunter]

Cari-bow Slynx 55@28 drawing 28 1/2"

29 3/4" Beman Centershot 400's
3 x 4" feathers
75 grain insert
175 grain BH
555 grain total

[tracker12]

Paying attention to this thread.  I have been shooting Beman ICS Hunters and they fly alright but I have had them break more than I like.  I am testing a GT Trad and might look at a better Beman arrow.

[kleine]

Dwyer Endevor 50lb at 28", approx. 28" draw
GT3555 cut 30"
3gr. weight tubes
8" wraps or painted
3 leftwing helical 5" shield cut
150 to 175gr. points and broadheads

[Gdpolk]

It's in my signature  

I've also been used to known to dabble with aluminum, wood, and cheap Wal-Mart specials.  However, my favorites and my only complete set of arrows are as listed in the signature.

[Stump73]

1. Is hunting setup for my Thunderchild 53@ 28 my draw 24 7/8"
   1535 GT trads 25 7/8"
   250 gr 2 blade Vpa Penetrator
   50gr brass insert
   3x4" feathers
   20gr nocturnal nock

2. Is hungting setup for my Dryad Orion 54@28
   350 Victory Vh 28 1/2
   250gr 2blade Penetrator
   100 gr brass insert
    3x4" feathers
    20gr nocturnal nock

[Todd Cook]

Straight limbed longbow, 58# at 29".
65/70 surewoods. Works for me.

[hitman]

Douglas fir shafts with nock taper stained, sealed , crested and fletched by me.

[Orion]

I don't have an arrow of choice.  I have several different arrows I use for different bows and purposes.  I have a 28-inch draw and shoot bows from 45# to 55# at my draw length. I shoot carbon and wood arrows, ranging from 500 to 650 grains with several different broad heads.  About the only things that stay the same across arrows is their length -- all cut to 29 inches -- and fletching -- three 5-inch shield cut left wing feathers.

[snag]

I prefer wood. Mainly Surewood Shaft premiums. I like the quality, the durability, the looks of the wood when stained, the weight, and the flight of a well built and tuned wood arrow. Perfection in motion.

[Whitetail Addict]

I'm shooting a Huntworthy Productions "Outlaw", at everything I can hunt here in NY. It's an all wood, R/D design, with bamboo back and belly. 51#@28", I draw 28". I'm shooting 29" Gold Tip Traditional Hunter 5575's, with 4" parabolic feathers and 125 gr. original Woodsman broadheads, at 8.5 gpp. This is basically the same combination of bow to arrow weight that I've used for quite a few years now, and I've really come to like it. Our biggest game animals here are whitetails and black bear, and I couldn't ask for any better performance on them.

Bob

[riverrat 2]

Easton 2018's 29.5"long with 3 5"fletchings on 7"cap wraps. .175 heads on every bow in my signature line.  rat'

[yeager]

RER XR - 60"/52#@28"......Easton Axis FMJ 500, 29", standard HIT insert, old Bear razorhead with screw-in broadhead adapter, 3x5" parabolic feathers, and Onestringer wraps with double dog.

Bob Lee Classic T/D - 60"/55#@28".......same arrow set-up except cut to 28 1/16".

[Terry Lightle]

Wood

[Bjorn]

For 3D I use cedar and hunting, doug fir. 80/85 11/32

[Wudstix]

Tapered Maple 28.5", five inch Traditional cut feather, 190 grain Grizzly Instinct head, 63# MOAB

[halfseminole]

Tapered hardwood 36" long, 1/2" to 23/64", drilled at the front for arrow tangs, oval reinforced self nocks, 3 11" feathers low to the shaft, Flagella Dei hand forged heads.

Got a pile like that in leopardwood on the way.

[TC in Spfld]

Drawing 28.5" with my 48# @ 28" Tall Tines I shoot a 2016 Legacy cut 29.5" bop, 3 five inch parabolics, 7" wrap, 22gr aluminum insert with a 125gr Eskimo attached.