AD Trad Heavies

[Moengo]

I have never used these shafts, and I am having a difficult time finding clear information regarding which knock adapers and point inserts are suitable for these (11.0 gr/in)specific shafts. Will the standard AD nock adapter work and... once the shaft is trimmed to say; 29" will a 100 gr. brass insert fit. Thanks!

[JRY309]

Yes the same nock adapter will work on Trad heavie's and Trad lite's and even Nitro stingers.For brass inserts the standard one for 5/16" carbons will not work.Go to gomuzzy.com the sell 100 gr. brass inserts for AD's.Also do not trim from the nock end,then your nock adapters probably won't fit right.On mine I glued in the nock adapters and then cut off the tip at the line closet to the arrow shaft and then you can use Easton G-nocks or use glue-on nocks 9/32 seem to fit best.They are alot better the the standard AD nock in my opinion.

[Moengo]

JRY,

Thanks for clearing up the nock adapters. Your opinion of the AD nock seems to mirror everyone elses I've talked to. When I look at the Muzzy site, I don't see inserts...the Muzzy inserts I see from LAS say they are for 5/16" shafts. I was hoping the standard 100 gr insert sold at 3R would work??

[huckbuck]

Moengo,

The brass inserts sold from Alaska Bowhunting Supply for the grizzly stiks also fit the ADs.

TH

[JRY309]

Moengo
    Go to gomuzzy.com again,I had a heck of a time finding them there myself.Go down to where it says Buy Muzzy Here and click on that and when you see a search window at the top of the page type in 557 and that will take you right to the inserts.

[Terry Green]

The Arrow Dymanics suppliers that sponsor Trad Gang carry all that stuff.