Author Topic: Preferred fetching glue for carbon? (Read 703 times)

Bullfrog 1 · « **on:** April 25, 2015, 09:14:00 PM »

What do you guys like? I usually use fletch title platinum. Thanks. Bill

jamesh76 · « **Reply #1 on:** April 25, 2015, 09:31:00 PM »

I really like using wraps and fletch tape + superglue gel. Or just superglue gel. I always use wraps because it makes re fletching easier.

M60gunner · « **Reply #2 on:** April 25, 2015, 09:38:00 PM »

There is a thread about issues using Fletch tite Plat on bare carbon. I know I was one. I went with Saunders NPV glue. Others liked the fletch tape, others various super glues. I would only use the Fletch Tite if you use wraps or cap dip with Fletch Lac paints. Prep is very important no matter what glue or tape you choose. I tend to go overboard on the bare shaft, I use acetone and 0000 steel wool. I also do this to remove the shaft makers info.

karrow · « **Reply #3 on:** April 25, 2015, 09:49:00 PM »

super glue

JamesV · « **Reply #4 on:** April 25, 2015, 09:49:00 PM »

I spray my carbons with Bull Dog adhesive promoter before fletching. Use duco and never have a problem.

James

Jon Stewart · « **Reply #5 on:** April 25, 2015, 10:05:00 PM »

Locktite Ultra gel super glue.

Jack Hoyt 75 · « **Reply #6 on:** April 25, 2015, 10:57:00 PM »

I have used several. Bob Smith Industries is the best IMO. Can order online. Very strong and dries fast.

Iowabowhunter · « **Reply #7 on:** April 25, 2015, 11:01:00 PM »

I use Fast Set gel, really like it

JRY309 · « **Reply #8 on:** April 25, 2015, 11:39:00 PM »

I always use wraps on my carbon arrows and use Platinum fletch tite for gluing.Holds great and haven't had any problem.Never like gluing to a carbon shaft.Using wraps makes them so much easier to redo later if needed.Carbons are tough arrows and chances are if you don't loose them you will be redoing them later.

**DONOTDELETE** · « **Reply #9 on:** April 26, 2015, 01:00:00 AM »

I prefer wraps on my carbon shafts typically, but even gluing right to carbon i like using Goat Tough for fletching over anything else.

http://www.georgesports.com/goat-tuff-high-impact-glue-5oz/?gclid=CjwKEAjw9uypBRD5pMDYtsKxvXcSJACcb9AYSmKtzle3KtEt5XbJUaEksza75xMngwmcGV7YM9CSUBoCfgvw_wcB

Possum Head · « **Reply #10 on:** April 26, 2015, 08:26:00 AM »

Platinum for me. Never lost a feather to it (bare carbon) but about 1 year inside and shelf life expires.

Bobby Urban · « **Reply #11 on:** April 26, 2015, 08:34:00 AM »

Babbling Bob · « **Reply #12 on:** April 26, 2015, 08:49:00 AM »

Saunders NPV for me!

ISP 5353 · « **Reply #13 on:** April 26, 2015, 03:13:00 PM »

Wraps and Locktite Gel.

bulldog18 · « **Reply #14 on:** April 26, 2015, 03:29:00 PM »

Gorilla super glue gel

ranger 3 · « **Reply #15 on:** April 26, 2015, 07:52:00 PM »

bowhuntingrn · « **Reply #16 on:** April 26, 2015, 10:08:00 PM »

Quote

Originally posted by ISP 5353:
Wraps and Locktite Gel.

This^^^

« **Reply #17 on:** April 26, 2015, 10:23:00 PM »

Quote

Originally posted by Bullfrog 1:
What do you guys like? I usually use fletch title platinum. Thanks. Bill

Same for me, and I never have feathers come off!

Bisch

Jakeemt · « **Reply #18 on:** April 26, 2015, 11:19:00 PM »

I like tape with a dab or gorilla super glue on the ends. Works great for me.

Flying Dogg · « **Reply #19 on:** April 27, 2015, 12:38:00 PM »

Saunders NPV glue.


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS

News:

Author Topic: Preferred fetching glue for carbon? (Read 703 times)

Users currently browsing this topic: