Kanati brace height

[trojanman]

What are my fellow kanati shooters using for brace height?
Also nock height?

[Turkhunter]

7 1/4 brace and 1/8 high nock with 2 nocks. I shoot 3 under.

[smokin joe]

My Kanati is a 60" model and 50# at 29".

Mine would not settle down until I got the brace height up to 7 5/8 to 7 3/4 inches. It is a dream of a bow at that brace height, and it is very noisy and harsh at anything lower.

For nock height, 3/4" is perfect.

Once you get it where it needs to be, the Kanati is a terrific bow.

[frankwright]

Think it would be a little less or the same for a 58" Kanati?

[BWD]

Frank, my 2013 58" likes 7-7 1/8". Some of it is going to depend on arrow tuning...slightly weak, slightly stiff, or just right. I'm thinking I might be a tad weak.

[frankwright]

Thanks BWD, I tuned mine and thought I had it shooting fine at 7 but some of the longer brace's posted here had me wondering if I was too low.

I will leave it alone and just keep shooting.

[trojanman]

Thanks guys. Really appreciate it.

[buckfever]

7 1/4". 5/8" hi.    58" kanati