Author Topic: Tapered Shafts (Read 578 times)

snag · « **on:** October 11, 2007, 04:37:00 PM »

Just picked up some POC tapered shafts. They are 5/16" on the nock end. Is there anything different involved in fletching these because of the different diameter and tapering? I use a JoJann fletcher.

Golden Hawk · « **Reply #1 on:** October 11, 2007, 04:38:00 PM »

No but you'll most likely have to reset your jig because of the taper.

Jwilliam · « **Reply #2 on:** October 11, 2007, 04:40:00 PM »

I don't do anything different. Fletch just the same as all my other arrows.

Bill

Big Dave · « **Reply #3 on:** October 11, 2007, 04:41:00 PM »

Same way

Bjorn · « **Reply #4 on:** October 11, 2007, 07:03:00 PM »

Nice avatar! Do them the same.

hawksnest · « **Reply #5 on:** October 11, 2007, 07:14:00 PM »

Quote

Originally posted by snag:
Just picked up some POC tapered shafts. They are 5/16" on the nock end. Is there anything different involved in fletching these because of the different diameter and tapering? I use a JoJann fletcher.

My Jo Jan does them with the same settings as parallel shafts. Bill G.

News:

Author Topic: Tapered Shafts (Read 578 times)

snag

Tapered Shafts

Golden Hawk

Re: Tapered Shafts

Jwilliam

Re: Tapered Shafts

Big Dave

Re: Tapered Shafts

Bjorn

Re: Tapered Shafts

hawksnest

Re: Tapered Shafts

Users currently browsing this topic:


LEFT HAND BOWS CLASSIFIEDS	TRAD GANG CLASSIFIEDS ACCESS	RIGHT HAND BOWS CLASSIFIEDS